Instruction/ maintenance manual of the product F230 Wagner SprayTech
Go to page of 13
0106 © 2006 W agner . All rights reserved. Form No. 0508296A Printed in the U. S. A. ® S E I D F GB NL DK F230 Airless Sprayer Owner ’ s Manual • Betriebsanleitung • Manuel d'utilisateur Manual de usuario • Manuale dell'utente • Gebruikshandleiding Ejermanual • Användarmanual English p.
2 © W agner . All rights reserved. T able of Contents Safety Precautions .................................................................2 General Description ...............................................................3 Specifications ..........
• Do not use materials with a flashpoint below 21° C (70° F). Flashpoint is the temperature at which a fluid can produce enough vapors to ignite. • Plastic can cause static sparks. Never hang plastic to e nclose spray area. Do not use plastic drop cloths when s praying flammable materials.
4 © W agner . All rights reserved. Preparing to Paint Attaching the T ip to the Gun 1. Lock the trigger by rotating the trigger lock forward until it stops. POSSIBLE INJECTION HAZARD. Do not spray without the tip guard in place. Never trigger the gun unless the tip is in either the spray or the unclog position.
Mounting the Paint Hopper Use the following procedure to mount the paint hopper and attach the return tube on a hopper unit. 1. Align the bottom of the paint hopper with the threaded inlet valve on the paint pump block. 2. T urn the paint hopper clockwise to thread it onto the inlet valve.
6 © W agner . All rights reserved. Spraying Spraying T echnique T he key to a good paint job is an even coating over the entire surface. This is done by using even strokes. Keep your arm moving at a constant speed and keep the spray gun at a constant distance from the surface.
Cleanup Overnight Storage Shutdown 1 . T urn the pressure control knob counterclockwise to the m inimum setting. 2. T urn the PRIME/SPRA Y valve to PRIME to release system pressure. 3. T rigger the gun to remove any pressure that may still be in the hose.
8 © W agner . All rights reserved. 9 . T urn the pressure control knob counterclockwise to the m inimum setting. 10. Place the attached suction tube and return hose into the container of water or appropriate solvent. 1 1. Remove the spray tip and guard and place them into a container of the appropriate solvent.
Maintenance F ollow these procedures when encountering problems i ndicated in the troubleshooting section. Removing and Cleaning the Inlet V alves 1. Perform the Pressure Relief Procedure, turn off and unplug the unit. 2. Remove the inlet valve assembly using a 27 millimeter socket or box end wrench.
10 © W agner . All rights reserved. R GB T roubleshooting P roblem The sprayer does not start up. The sprayer starts up but does not draw in paint when the PRIME/SPRA Y valve is set to PRIME. The sprayer draws up paint but the pressure drops when the gun is triggered.
© W agner . All rights reserved. 11 GB R Parts Listing Main Assembly — Hopper Unit Item Part # Description Quantity 1 0288144 Hopper assembly ..................................1 2 ---------- Pump head assembly ...........................1 3 0555126 Diaphragm pump, 220–240 V AC .
12 © W agner . All rights reserved. R GB Diaphragm Pump (P/N 0555126 / 220–240 V AC or P/N 031 1200 / 100–120 V AC) 13 17 18 4 5 6 7 8 9 10 11 12 13 14 15 16 1 2 3 19 20 21 22 23 25 24 26 AS-31 1.
© W agner . All rights reserved. 13 GB R Pump Head Assembly Item Part # Description Quantity 1 0278242 Inlet valve assembly (includes item 2)........1 2 0089482 Sealing washer , nylon .................................1 3 0278334 Paint pump...........
An important point after buying a device Wagner SprayTech F230 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wagner SprayTech F230 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wagner SprayTech F230 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wagner SprayTech F230 you will learn all the available features of the product, as well as information on its operation. The information that you get Wagner SprayTech F230 will certainly help you make a decision on the purchase.
If you already are a holder of Wagner SprayTech F230, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wagner SprayTech F230.
However, one of the most important roles played by the user manual is to help in solving problems with Wagner SprayTech F230. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wagner SprayTech F230 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
