Instruction/ maintenance manual of the product 558045 Wagner SprayTech
Go to page of 32
Edition 3 / 2015 0558 935J ProSpray 3.34 GB Operating manual ProSpray 3.34 Airless high-pressure spraying unit Models: 0558025 0558045 0558053 Original operating manual.
2 ProSpra y 3.34 GB Warning! Attention: Danger of injury by injection! Airless units develop extremely high spraying pressures. Be safety conscious! 1 2 3 Never put your ngers, hands or any other parts of the body into the spray jet! Never point the spray gun at yourself, other persons or animals.
ProSpra y 3.34 3 GB Contents Contents Page 1. Safety regulations for Airless spraying ...................................... 4 1.1 Explanation of symbols used .............................................................. 4 1.2 Electric Safety .......
4 ProSpra y 3.34 GB Safety Regulations 1. Safety regulations for Airless spraying 1.1 Explanation of symbols used This manual contains information that must be read and understood before using the equipment. When you come to an area that has one of the following symbols, pay particular attention and make certain to heed the safeguard.
ProSpra y 3.34 5 GB Safety regulations • Followmaterialandsolventmanufacturer’swarningsand instructions.Befamiliarwiththecoatingmaterial’sMSDS sheet and technical information to ensure safe use.
6 ProSpra y 3.34 GB General view of application Description of unit 2. General view of application 2.1 Application 2.2 Coating materials Processible coating materials i Pay attention to the Airless quality of the coating materials to be processed.
ProSpra y 3.34 7 GB Description of unit 7 8 2 1 3 5 6 4 9 10 13 12 11 14 3.3 Legend for explanatory diagram ProSpray 3.34 1 Spray gun 2 High-pressure hose 3 Oil cup for EasyGlide (EasyGlide prevents i.
8 ProSpra y 3.34 GB Description of unit Starting operation 3.5 Technical data Voltage: 110-120VoltAC,50/60Hz Max. current consumption: 15 A Power cord: 3 x 1.5 mm 2 – 6 m or 4.6 m Acceptance capacity: 1955 Watt Max. operating pressure: 221 bar (22,1 MPa) Volume ow at 12 MPa (120 bar) with water: 4.
ProSpra y 3.34 9 GB Starting operation 4 4.2 Control Panel Indicators The following is a description of the control panel indicators. Pr essure Indicato r Ser vice Indicato r Pressure Indicator The pressure indicator shows the current operating pressure of the sprayer.
10 ProSpra y 3.34 GB Starting operation 4.5 Cleaning preserving agent when starting-up of operation initially 1. Immerse the suction tube (Fig. 7, Item 1) and return hose (2) into a container with a suitable cleaning agent. 2. Turn the pressure control knob counterclockwise (3) to minimum pressure.
ProSpra y 3.34 11 GB Starting operation Volume Pumped Screen VOLUME PUMPED SELECT-4 MENU-1 TheVolumePumpedscreenshowsthe total number of gallons or liters sprayed by the sprayer. GALLONS X MENU-1 LITRES X MENU-1 LITRES-2 GALLONS-2 ToselecttheVolumePumpedscreen,press the #4 key.
12 ProSpra y 3.34 GB Spraying technique Handling the high-pressure hose 5. Spraying technique Injection hazard. Do not spray without the tip guard in place. NEVER trigger the gun unless the tip is completely turned to either the spray or the unclog position.
ProSpra y 3.34 13 GB Cleaning the unit (shutting down) 8. Cleaning the unit (shutting down) A clean state is the best method of ensuring operation without problems.Afteryouhavenishedspraying,cleantheunit.Underno circumstances may any remaining coating material dry and harden in the unit.
Assembly 1. Place intake lter (3) with the long cone into the gun housing. 2. Screw in grip (2) into the gun housing and tight en. 3. Slot in protective guard (1). Warning: keep clear of tip 250 bar max.3600 psi 3 2 1 14 ProSpra y 3.34 GB Cleaning the unit (shutting down) Remedy in case of faults Type of malfunction A.
ProSpra y 3.34 15 GB Remedy in case of faults Type of malfunction D. Coating material exits at the top of the uid section E. Increased pulsation at the spray gun F. Poor spray pattern G. Unitlosespower Possible cause 1. Upperpackingisworn.
16 ProSpra y 3.34 GB Servicing Repairs at the unit 10. Servicing 10.1 General servicing Servicing of the unit should be carried out once annually by the WAGNER service. 1. Check high-pressure hoses, device connecting line and plug for damage. 2. Check the inlet valve, outlet valve and lter for wear.
ProSpra y 3.34 17 GB Repairs at the unit 14. Unscrewlowerhousing(Fig.13,Item10)withadjusting wrench while holding the upper housing (11) securely with a second adjusting wrench. 15. Remove bearing ring (13) and O-ring (12).
18 ProSpra y 3.34 GB Repairs at the unit 12. Insert upper packing (Fig. 15) with O-ring (1) and protruding lip (2) downward into the upper housing (6). 1 2 13. Place intermediate ring (Fig. 14, Item 10) on the upper packing (8). 14. Screw threaded joint (Fig.
ProSpra y 3.34 19 GB Appendix 12. Appendix 12.1 Selection of tip To achieve faultless and rational working, the selection of the tip is of the greatest importance. In many cases the correct tip can only be determined by means of a spraying test. Some rules for this: The spray jet must be even.
20 ProSpra y 3.34 GB Appendix 12.4 Airless tip table Wagner TradeTip 3 tip up to 270 bar (27 MPa) without tip Fthread(11/16-16UN) for W agner spra y guns Order no . 0289391 without tip Gthread(7/8-14UN) for Graco/T itan spray guns Order no .
ProSpra y 3.34 21 GB Appendix Application Tip marking Spray angle Bore inch / mm Spraying width mm 1) Gun lter Order no . Roof coatings 223 323 423 523 623 723 823 20° 30° 40° 50° 60° 70° 80° 0.023 / 0.58 0.023 / 0.58 0.023 / 0.58 0.023 / 0.
22 ProSpra y 3.34 GB Appendix 12.5 Pump-Runner (Order No. 2306987) Universalaccessoriesforcleaning,cleantransportationandpreservationofthepumpunit.
ProSpra y 3.34 23 www.wagner-group.com A J. W agner Ges.m.b.H. Ottogasse 2/20 2333 Leopoldsdorf Österreich T el. +43/ 2235 / 44 158 T elefax +43/ 2235 / 44 163 oce@wagner-group .at DK W agner Sprayt ech Scandinavia A/S Helgeshøj Allé 28 2630 T aastrup Denmark T el.
24 ProSpra y 3.34 Accessories illustration ProSpray 3.34 3 1 5 7 2 4 6 8.
ProSpra y 3.34 25 Item Part No. Description 1 0296 388 Spray gun AG 08, F-thread 0296 386 Spray gun AG 08, G-thread 0502 166 Spray gun AG 14, F-thread 0502 119 Spray gun AG 14, G-thread 2 0296 441 Pol.
26 ProSpra y 3.34 Spare parts list ProSpray 3.34 1 3 4 5 6 9 8 34 35 2 36 7 2 48 49 10 11 12 13 16 15 14 17 18 19 20 21 22 23 24 26 27 28 30 31 33 32 29 25 37 38 39 59 41 40 44 42 43 45 46 47 Main Ass.
ProSpra y 3.34 27 Item Part No. Description 1 805-625 Motor shroud 2 0508 559 Screw (2) 3 0290 475 Belly pan 4 9802 266 Screw (2) 5 0290 228 Door 6 0509 218 Screw (2) 7 0290 253 Grommit 8 0551 778 Tra.
28 ProSpra y 3.34 Spare parts list ProSpray 3.34 1 4 5 6 2 3 12 13 14 15 16 17 18 7 8 9 10 19 20 21 22 11 9 10 23 24 Fluid section Item Part No. Description 1 0290 266 Retainer 2 0290 265 Spacer 3 ---.
ProSpra y 3.34 29 Spare parts list ProSpray 3.34 15 16 4 5 6 7 8 12 11 13 14 9 10 1 2 3 17 18 19 Drive Assembly Item Part No. Description 1 0290 241 Slider assembly 2 0507 767 Screw (4) 3 0290 272 Sli.
30 ProSpra y 3.34 ProSpray 3.34 Filter assembly Spare parts list 1 2 3 4 5 6 7 8 9 10 11 12 13 14 Item Part No. Description 1 0524 918 Filter housing 2 14058 Conical spring 3 0508 748 Filter, 60 mesh .
ProSpra y 3.34 31 Spare parts list ProSpray 3.34 15 1 2 3 4 5 7 6 8 9 17 16 18 13 14 15 12 11 10 19 20 Upright cart assembly Item Part No. Description 1 0290 296 Handle assembly 2 9805 352 Screw (2) 3.
GB 32 ProSpra y 3.34 Important notes on product liability As a result of an EC regulation being eective as from January 1, 1990, the manufacturer shall only be liable for his product if all parts come from him or are released by him, and if the devices are properly mounted and operated.
An important point after buying a device Wagner SprayTech 558045 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wagner SprayTech 558045 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wagner SprayTech 558045 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wagner SprayTech 558045 you will learn all the available features of the product, as well as information on its operation. The information that you get Wagner SprayTech 558045 will certainly help you make a decision on the purchase.
If you already are a holder of Wagner SprayTech 558045, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wagner SprayTech 558045.
However, one of the most important roles played by the user manual is to help in solving problems with Wagner SprayTech 558045. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wagner SprayTech 558045 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
