Instruction/ maintenance manual of the product 558019 Wagner SprayTech
Go to page of 28
Edition 9 / 2014 0558 932J ProSpray 3.21 GB Operating manual ProSpray 3.21 Airless high-pressure spraying unit Models: 0558019 0558046 Original operating manual.
2 ProSpra y 3.21 GB Warning! Attention: Danger of injury by injection! Airless units develop extremely high spraying pressures. Be safety conscious! 1 2 3 Never put your ngers, hands or any other parts of the body into the spray jet! Never point the spray gun at yourself, other persons or animals.
ProSpra y 3.21 3 GB Contents Contents Page 1. Safety regulations for Airless spraying ...................................... 4 1.1 Explanation of symbols used .............................................................. 4 1.2 Electric Safety .......
4 ProSpra y 3.21 GB Safety Regulations 1. Safety regulations for Airless spraying 1.1 Explanation of symbols used This manual contains information that must be read and understood before using the equipment. When you come to an area that has one of the following symbols, pay particular attention and make certain to heed the safeguard.
ProSpra y 3.21 5 GB Safety regulations • Followmaterialandsolventmanufacturer’swarningsand instructions.Befamiliarwiththecoatingmaterial’sMSDS sheet and technical information to ensure safe use.
6 ProSpra y 3.21 GB General view of application Description of unit 2. General view of application 2.1 Application 2.2 Coating materials Processible coating materials i Pay attention to the Airless quality of the coating materials to be processed.
ProSpra y 3.21 7 GB Description of unit 14 13 12 11 15 16 7 1 3 4 6 5 9 10 2 8 3.3 Legend for explanatory diagram ProSpray 3.21 3 Return hose 4 Suction hose 5 Frame 6 Drip cup 7 Power cord 8 Relief va.
8 ProSpra y 3.21 GB Description of unit Starting operation 3.5 Technical data Voltage: 100-120Volt,50/60Hz Max. current consumption: 9.0 A Power cord: 3 x 1.5 mm 2 – 6 m or 2.5 m Acceptance capacity: 900 Watt Max. operating pressure: 221 bar (22.
ProSpra y 3.21 9 GB Starting operation 6 4.2 Control Panel Indicators The following is a description of the control panel indicators. Pr essure Indicato r Ser vice Indicato r Pressure Indicator The pressure indicator shows the current operating pressure of the sprayer.
10 ProSpra y 3.21 GB Starting operation Spraying technique 4.5 Cleaning preserving agent when starting-up of operation initially 1. Immerse the suction tube (Fig. 6, Item 1) and return hose (2) into a container with a suitable cleaning agent. 2. Turn the pressure control knob counterclockwise (3) to minimum pressure.
ProSpra y 3.21 11 GB Handling the high-pressure hose Cleaning the unit (shutting down) 6. Handling the high-pressure hose The unit is equipped with a high-pressure hose specially suited for piston pumps. Danger of injury through leaking high-pressure hose.
12 ProSpra y 3.21 GB Cleaning the unit (shutting down) 8.2 Suction lter i A clean suction lter always guarantees maximum feed quantity, constant spraying pressure and problem-free functioning of the unit. 1. Screw o the lter (Fig. 7) from suction pipe.
ProSpra y 3.21 13 GB Remedy in case of faults Type of malfunction A. Unitdoesnotstart B. Unitdoesnotdrawinmaterial C. Unitdrawsinmaterial,butthe pressure does not build up D. Coating material exits at the top of the uid section E.
14 ProSpra y 3.21 GB Servicing Repairs at the unit 10. Servicing 10.1 General servicing Servicing of the unit should be carried out once annually by the WAGNER service. 1. Check high-pressure hoses, device connecting line and plug for damage. 2. Check the inlet valve, outlet valve and lter for wear.
ProSpra y 3.21 15 GB Repairs at the unit 11 10 12 13 9 8 11.3 Packings 1. Remove inlet valve housing in accordance with the steps in Chapter 11.2, Page 14. 2. It is not necessary to remove the outlet valve. 3. Unscrewbothcylinderheadscrews(Fig.
16 ProSpra y 3.21 GB Repairs at the unit 18. Slide the top of the piston (3) into the T-slot (9) on the slider assembly (4). 19. Position the pump manifold (2) underneath the gear unit housing and push up until it rests against the gear unit housing. 20.
ProSpra y 3.21 17 GB Appendix 12. Appendix 12.1 Selection of tip To achieve faultless and rational working, the selection of the tip is of the greatest importance. In many cases the correct tip can only be determined by means of a spraying test. Some rules for this: The spray jet must be even.
18 ProSpra y 3.21 GB Appendix Application Tip marking Spray angle Bore (inch / mm) Spraying width mm 1) Order no. Natural paints Clear paints Oils Spray gun lter “RED” 407 40° 0.007 / 0.18 160 0552 407 507 50° 0.007 / 0.18 190 ––––––– 209 20° 0.
ProSpra y 3.21 19 GB Appendix 12.5 Pump-Runner (Order No. 2306987) Universalaccessoriesforcleaning,cleantransportationandpreservationofthepumpunit.
20 ProSpra y 3.21 Accessories illustration ProSpray 3.21 3 1 5 7 9 2 4 6 8.
ProSpra y 3.21 21 Item Part No. Description 1 0296 388 Spray gun AG 08, F-thread 0296 386 Spray gun AG 08, G-thread 0502 166 Spray gun AG 14, F-thread 0502 119 Spray gun AG 14, G-thread 2 0296 441 Pol.
22 ProSpra y 3.21 Spare parts list ProSpray 3.21 28 30 29 31 32 33 34 35 1 19 18 25 49 6 26 43 21 22 23 24 20 45 46 47 48 7 5 9 10 11 8 27 44 2 3 4 37 36 40 38 39 41 42 14 15 16 17 12 13 Main Assembly 0558 466 ~110V 6 m 0290 281 ~120V 2.
ProSpra y 3.21 23 Item Part No. Description 1 0290 230 Motor shroud 2 9805 403 Set screw 3 9810 103 Nut 4 0524 353 Nut 5 9800 319 Screw (2) 6 9822 627 Washer (2) 7 0558 332A Belly pan assembly (includ.
24 ProSpra y 3.21 Spare parts list ProSpray 3.21 24 23 25 26 27 28 29 30 31 32 33 34 1 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 2 3 4 5 7 6 Fluid section Item Part No.
ProSpra y 3.21 25 Spare parts list ProSpray 3.21 3 4 2 1 5 6 7 8 9 10 11 8 12 Drive Assembly Item Part No. Description 1 0524 637A Housing assembly 2 0509 121 2nd stage gear 3 0558 373 Motorassembl.
26 ProSpra y 3.21 1 3 2 4 5 ProSpray 3.21 1 4 56 7 8 9 2 3 10 Stand Spare parts list Item Part No. Description 1 9805 367 Screw (3) 2 0290 215 Drip cup 3 0290 211 Leg, right 4 0294 635 Plug 5 0290 214.
ProSpra y 3.21 27 GB Important notes on product liability As a result of an EC regulation being eective as from January 1, 1990, the manufacturer shall only be liable for his product if all parts come from him or are released by him, and if the devices are properly mounted and operated.
28 ProSpra y 3.21 www.wagner-group.com A J. W agner Ges.m.b.H. Ottogasse 2/20 2333 Leopoldsdorf Österreich T el. +43/ 2235 / 44 158 T elefax +43/ 2235 / 44 163 oce@wagner-group .at DK W agner Sprayt ech Scandinavia A/S Helgeshøj Allé 28 2630 T aastrup Denmark T el.
An important point after buying a device Wagner SprayTech 558019 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wagner SprayTech 558019 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wagner SprayTech 558019 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wagner SprayTech 558019 you will learn all the available features of the product, as well as information on its operation. The information that you get Wagner SprayTech 558019 will certainly help you make a decision on the purchase.
If you already are a holder of Wagner SprayTech 558019, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wagner SprayTech 558019.
However, one of the most important roles played by the user manual is to help in solving problems with Wagner SprayTech 558019. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wagner SprayTech 558019 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
