Instruction/ maintenance manual of the product 239012 Wagner SprayTech
Go to page of 20
F inishC ontrol 5000 2339012 07/ 2014 - A US- Operating manual 1.
FinishContr ol 5000 1. 1. 2. A 3. A B 1 26 2 3 4 5 7 8 9 10 6 11 12 13 16 17 18 20 19 21/22 23 24 25 14 15 1 27 28.
FinishContr ol 5000 1. 2. 1 1 1 A B 3 – 20 cm 1. 2. 1 2.
FinishContr ol 5000 1 2 3 4 5 1.
FinishContr ol 5000 3 2 1 2 1 3 4 5 6 7 13 1 2 3 4 5 6 7 8 9 10 11 12 14.
FinishContr ol 5000 AU S CONTENT S C onten ts 1 SAFETY REGULA TIONS _______________________ 1 2 EXPLANA T ORY DIA GRAM _____________________ 3 3 THE W AGNER CLICK &P AINT SY STEM ___________ 3 3.
1 FinishContr ol 5000 AU S 1 SAFETY REGULA TIONS All local safety regulations in f orce must be observed. Read the operating instructions carefully and follow the in- structions laid down in them in order to av oid risks. 1. Safety at the w orkplace a) Keep y our workplace clean and w ell lit.
2 FinishContr ol 5000 AU S 5. Ser vice a) Hav e your tool repaired only b y qualied specialist personnel and only with original spare parts. This ensures that the tool safety is maintained.
3 FinishContr ol 5000 AU S 2 EXPLANA T OR Y DIA GRAM FIG . 1 3 THE W A GNER CLICK& P AINT SY STEM POS. DESIGNA TION 1 Nozzle 2 Air cap 3 Spray jet width adjusting lever (shaping air) 4 Spray.
4 FinishContr ol 5000 AU S TECHNICAL D A T A/ INTRODUCTION/ PREP ARING THE CO A TING MA TERIAL 4 TECHNICAL DA T A V oltage: 240 V~, 50 Hz P ower consumption: 1500 W Atomizing output: 300 W Container v.
5 FinishContr ol 5000 AU S SETTING THE SPRA Y GUN / ST ARTING OPERA TION/ SPRA YING TECHNIQUE Anti-rust paints, spe- cial-eect paints obser ve manufac- turer’ s instruc tions Multicolor paints, textured paints obser ve manufac- turer’ s instruc tions W allSpray spray attachment (white) recom- mended 7 SET TING THE SPRA Y GUN 7.
6 FinishContr ol 5000 AU S 10 BREAKS IN W ORK 1. Switch device o with main swit ch on the basic unit. 2. Inser t spray gun into gun mounting on the devic e. In using quick-dr ying or two -component coating materials, do not fail to rinse unit thr ough with a suitable cleaning agent during the processing period.
7 FinishContr ol 5000 AU S 13 MAINTENANCE 13 .1 AIR FIL TER Atten tion! Never oper ate the device with the air lter soiled or missing, as dirt could be sucked up and aect the operation of the device . Alway s check the air lter befor e star ting wor k.
8 FinishContr ol 5000 AU S 14 C ORREC TION OF MALFUNCTIONS MALFUNCTION CAUSE REMEDY The unit will not start • No mains voltage • Device overheat ed • Check • Unplug the power plug , let the device cool down appro x.
9 FinishContr ol 5000 AU S 15 A C CESSORIES AND SP ARE P ARTS 15 .1 A C CESSORIES POS. ORDER NO . DESIGNA TION 1 2321 879 StandardSpray spray attachmen t (yellow) (with 1000 ml container) Pr ocesses all standard paints. 2 2321 877 FineSpray spra y attachment (brown) (with 1000 ml con tainer) Ideal for low- viscosity paints and glazes.
10 FinishContr ol 5000 AU S POS. ORDER NO . DESIGNA TION 14 2324 248 2324 249 F ine feed tube lter (red , 5 pc.) Coarse feed tube lt er (white, 5 pc.
11 FinishContr ol 5000 AU S TESTING OF THE UNIT F or safety reasons, w e would recommend ha ving the device checked by an expert as required but at least ev er y 12 months to ensure that it can c ontinue to operate saf ely . In the case of unused devices, the check can be postponed until they are next started up.
12 FinishContr ol 5000 AU S 3. Handling If defects can be seen in the materials, processing or perform- ance of the device during the guarantee period , guarantee claims must be made immediately , or at the lat est within a period of 2 weeks. The authorised specialist shop that deliver ed the device is enti- tled to accept guaran tee claims.
13 FinishContr ol 5000 AU S 1st January 2012 W AGNER W ARRANTY POLIC Y Our goods come with guarantees that cannot be e xcluded under the Australian C onsumer Law . Y ou are entitled to a r eplacement or refund f or a major failure and for compensation f or any other reasonably f oreseeable loss or damage.
14 FinishContr ol 5000 AU S AUTHORISED SERVICE CENTRES Wagner Spraytech Australia 14-16 Kevlar Close, Braeside, Victoria, 3195. Customer Service 1800 924 637 Email: info@wagneraustralia.
An important point after buying a device Wagner SprayTech 239012 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wagner SprayTech 239012 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wagner SprayTech 239012 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wagner SprayTech 239012 you will learn all the available features of the product, as well as information on its operation. The information that you get Wagner SprayTech 239012 will certainly help you make a decision on the purchase.
If you already are a holder of Wagner SprayTech 239012, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wagner SprayTech 239012.
However, one of the most important roles played by the user manual is to help in solving problems with Wagner SprayTech 239012. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wagner SprayTech 239012 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
