Instruction/ maintenance manual of the product 179070 Wagner SprayTech
Go to page of 16
English Français Español 0104 © 2004 W agner . All rights reserved. Form No. 0551368A Printed in the U. S. A. GM 2600 Air Assisted/Airless Spray Gun Owner ’ s Manual • Manuel de l'utilisat.
T able of Contents Safety Precautions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 2 Specifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 Introduction. . . . . . . . . . . . . . . . . . . . . . . . . .
Specifications Maximum air input pressure ............145 PSI (1 MPa) Maximum working pressure .............3600 PSI (25 MPa) Material quantity .............................according to tip Air connector ...................................NPSM 1/4" Material connector .
Cleanup • Release system and spray gun pressure before cleaning or performing maintenance on the gun. • Use only the cleaning solvent recommended by the material manufacturer . • Never spray into an enclosed vessel (this will create an explosive gas / air mixture).
Cleaning/Changing the Filter 1. Remove the high pressure hose from the material inlet fitting. 2. Holding the material tube at the wrench flats with one wrench, unscrew the material inlet fitting another wrench. 3. Pull out the cylindrical filter . 4.
T able des matières Consignes de sécurité . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 Spécifications . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 Introduction. . . . . . . . . . . . . . . . . . . . . . . . .
PRÉVENTION : • Utilisez un masque de protection si des vapeurs peuvent être inhalées. Lisez attentivement toutes les instructions fournies avec le masque pour vous assurer qu'il vous procurera toute la protection nécessaire. • Portez des lunettes de protection.
4. Placez la buse à air sur la tête. V eillez à ce que les broches de la buse soient alignées avec les fentes de la tête. 5. Réglez le plan de pulvérisation voulu à l’aide des cornes de la buse à air et replacez l’embout de protection de la tête.
3. Dévissez la vis du presse-étoupe du manchon d’étanchéité. 4. Retirez avec précautions l’ensemble de la tige de soupape par l’arrière du pistolet. 5. Maintenez le support de la tige de soupape avec la clé fournie avec le pistolet et dévissez le support des billes de soupape avec une pince.
T abla de contenidos Precauciones de seguridad . . . . . . . . . . . . . . . . . . . . . . . 10 Especificaciones . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 1 Introducción . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
• Desconecte siempre el motor del suministro de energía eléctrica antes de trabajar en el equipo. • Siga todos los códigos locales, estatales y nacionales que rijan la ventilación, la prevención de incendios y la operación.
5. Ajuste el plano de pulverización deseado con las horquillas de la tapa de aire y reemplace el protector de la punta. 6. Instale la unidad rociadora (consulte el Manual del propietario de la unidad rociadora). 7. Conecte la manguera de materiales que viene de la unidad rociadora en el adaptador de admisión de aire de la pistola.
3. Destornille el tornillo de la empaquetadura de la manga del sello. 4. Retire cuidadosamente todo el vástago de la válvula de la parte trasera de la pistola. 5. Sosteniendo la armadura del vástago de la válvula con la llave de tuercas de la pistola, destornille con un alicate el soporte de la bola de la válvula.
English 14 © 2004 W agner. All rights reserved. Français Español R NOTE: Refer to the “AirCoat Tip Chart” in the Accessories section of this manual for additional tip sizes (item16).
English © 2004 W agner. All rights reserved. 15 Español Français R Item Part Number Description Quantity 1 0179555 Air adjustment knob ..............................................1 2 9971003 O-ring ................................................
English 16 © 2004 W agner. All rights reserved. Français Español R Accessories • Accessoires • Accesorios Gun Tip Cleaner • Nettoyeur de têtes de pistolet • Limpiador de puntas de la pistola P/N 0179015 AirCoat Tip Chart Part Number Orifice Size Spraying Angle Gun Filter Mesh 0143209 0.
An important point after buying a device Wagner SprayTech 179070 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wagner SprayTech 179070 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wagner SprayTech 179070 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wagner SprayTech 179070 you will learn all the available features of the product, as well as information on its operation. The information that you get Wagner SprayTech 179070 will certainly help you make a decision on the purchase.
If you already are a holder of Wagner SprayTech 179070, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wagner SprayTech 179070.
However, one of the most important roles played by the user manual is to help in solving problems with Wagner SprayTech 179070. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wagner SprayTech 179070 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
