Instruction/ maintenance manual of the product TAW-2030 Wachsmuth & Krogmann
Go to page of 21
8 GALLON OIL FREE AIR COMPRESSOR Item# 6923-05 Model # TAW-2030 PLEASE READ AND SAVE ALL INSTRU CTIO NS TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL.
1 TABLE OF CONTENTS Index P. 1 Important Safety Instructio ns P. 2-5 Electrical Requirements P. 6 General Safety Rules P. 7,8 List of Main Parts, Tech. Specificat io ns P. 9 Contents of Packaging, Inst allation P. 10 Operation P. 11- 13 Maintenance P.
IMPORTANT SAFETY INSTRUCTIONS PLEASE READ THESE INSTRUCT IONS CA REFULLY TO ENSURE THE SAFE AND EFFECTIVE USE OF THIS TOOL. Before working with this air c ompressor read and under stand this instruction manual and safety instructions carefully.
3 c u SAFETY WARNINGS READ ALL SAFETY WARNINGS BEFORE USING AIR COMPRE SS OR! WARNING: TO REDUCE THE RISK OF EXPLOSION OR FIRE OR BURSTING Serious injury or death may occur from normal electrical sparks in motor and pressure switch.
4 WARNING: TO REDUCE THE RISK TO BREA THING, OF BURNS AND FLYING OBJECTS Serious injury or death could occur from inhaling compressed ai r. The air stream may contain carbon mo noxide, toxi c vapors or solid particles. Sprayed materials such as paint, paint solven ts, paint remover, in secticides, weed killers, etc.
5 Do not use the compre ssor without i nstalled guards. Please note that the compressor w ill start automatically , when the pressu re falls to the minimum designated pressure. Make sure the compressor is switc hed off and disconnected from the power supply before starting it.
Electrical Requirements General Electrical Connections DANGER: To re duce the r isk o f ele ctro cution : 1. Use only identic al replacement parts when servicing. Servicin g should be performed by a qualified servic e technician. 2. Do not use in rain or where floor is wet.
GENERAL SAFETY RULES WARNING! Read, understan d and save all instruct ions. Failure to fol low all instructions listed belo w may result in electric sh ock , fire or serious personal injury. The warnings, caution s, and instruct ions discussed in this inst ruction manua l cann ot cover all possible conditions and situatio ns that may occur.
8 3. Do no t us e t o o l i f s w i t c h d o e s n o t t u r n O N o r O F F . A n y t o ol t h a t c a n n o t b e c o n t r o l l e d with a switch is dangerous and must be repaired. 4. Place the switch in locked or OFF position before making any adjustments, changing accessories or storing the tool.
9 LIST OF MAIN PARTS Description 1. pressure tank 2. drain valve 3. suction filte r 4. pressure regulator 5. on-/off-switch 6. working pressure gauge 7.
CONTENTS OF PACKAGING a. Air compressor b. 25’ coiled air hose with female and male quick connector c. 2 brass quick female connectors d. 2 wheels e. 2 wheel bolts f. 2 lock nuts g. 2 screw nuts If any of the above items are missing, plea se contact our service department at 1-888- 367-7373 (http://wwwk.
OPERATION Before each use CAUTION: Serious injury or death may occur if electrical sparks from motor and pressure switch come in contact with fl ammable vapors, combustible dust, gases or other combustible materials. When using t he air compressor for spray painting, place the air compres sor as far away from the work area as possible.
4. Set the pressure regulator to the requi red working pressure. (see FIG. 2) FIG. 2 5. Connect the air-hose to the pressure-hose connector (8). (see FIG. 3) 6. Connect the air-tool wi th the air-hose. 7. If you will not start to work immediately, switch the compressor off a nd disconnect from the power-supply.
Shutdown 1. Switch the compressor “OFF” (press switch do wn) never stop the air compressor by unplugging it from the power source. Th is could result in risk of electrocution. (see FIG. 1) 2. Drain air from the air tank by releasing air with an attach ed air tool or by pulli ng on the safety relieve vale ring.
MAINTENANCE CAUTION: Before starting any maintenance or clean ing jobs, the compressor has to be switched off and disconnected fr om the power supply! Make sure the compressor accessories and air tools are relieved from pressure.
15 TROUBLE SHOOTING Problem Cause Solution Excessive tank pressure - safety valve pops off. • Pressure switch does not shut off motor when compressor reaches “cut-out” pressure. • Pressure switch “cut-out” too high. • Switch the compressor “OFF” If the unit doesn’t shu t off, unplug compressor.
16 Air leaks in air tank or at air tank welds. • Damaged air tank. • DO NOT DRILL INTO, WELD OR OTHERWISE MODIFY AIR TANK OR IT WILL WEAKEN. THE TANK CAN RUPTURE OR EXPLODE. TANK MUST BE REPLACED . • Contact an authorized qualified service center.
Air leak from safety valve. • Possible defect in safety valve. • Operate safety valve manually by pullin g on ring. If valve stil l leaks, it should be replaced. Knocking Noi se. • Malfunction ing check valve. • Remove and clean, or replace. Compressor is not supplying enough air to operate accessories.
18 LIMITED WARRANTY Thank you for purchas ing a top quali ty KingCraft pro duct. This Oil Free Air Compressor item #6923-05 was tested and meets our stringent quality standards.
19.
WARRANTY CARD KingCraft Oil Free Air Compr ess or, item # 6923-05 , model # TAW-2030 In case you find thi s product to be defective please send it within the warranty period to our service center. To avoid transport d amages please send the product in th e original packaging.
An important point after buying a device Wachsmuth & Krogmann TAW-2030 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Wachsmuth & Krogmann TAW-2030 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Wachsmuth & Krogmann TAW-2030 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Wachsmuth & Krogmann TAW-2030 you will learn all the available features of the product, as well as information on its operation. The information that you get Wachsmuth & Krogmann TAW-2030 will certainly help you make a decision on the purchase.
If you already are a holder of Wachsmuth & Krogmann TAW-2030, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Wachsmuth & Krogmann TAW-2030.
However, one of the most important roles played by the user manual is to help in solving problems with Wachsmuth & Krogmann TAW-2030. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Wachsmuth & Krogmann TAW-2030 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
