Instruction/ maintenance manual of the product VW2DB ML-126511 Vulcan-Hart
Go to page of 12
– 1 – VW SERIES DRA WER W ARMERS MODELS VW1S ML-126500 VW2S ML-126502 VW3S ML-126504 VW4S ML-126506 VW1SB ML-126501 VW2SB ML-126503 VW3SB ML-126505 VW4SB ML-126507 VW1D ML-126508 VW2D ML-126510 VW.
– 2 – T ABLE OF CONTENTS GENERAL ............................................................................................................................................. 3 INSTALLATION .........................................................
– 3 – Installation, Operation and Care of MODEL VW SERIES DRA WER W ARMERS PLEASE KEEP THIS MANUAL FOR FUTURE USE GENERAL Vulcan-Hart Drawer Warmers are produced with quality workmanship and material. Proper installation, usage, and maintenance of your drawer warmer will result in many years of satisfactory performance.
– 4 – LOCATION For efficient drawer warmer operation, choose a location that will provide easy loading and unloading without interfering with the final assembly of food orders. The installation location must allow adequate clearances for servicing and proper operation.
– 5 – Electrical Table Model Voltage Phase NEMA Plug VW1S, VW2S, VW3S, VW1SB, 110/120 1 5-15 VW2SB, VW3SB, VW1D, VW2D, 208/240 6-15 VW3D, VW1DB, VW2DB, VW3DB VW4S, VW4SB, VW4D, VW4DB 110/120 1 5-1.
– 6 – VW2D, VW2DB, VW2S, VW2SB WIRING DIAGRAMS VW1D, VW1DB, VW1S, VW1SB.
– 7 – VW4D, VW4DB, VW4S, VW4SB VW3D, VW3DB, VW3S, VW3SB.
– 8 – VW2C, VW2CB VW1C, VW1CB.
– 9 – OPERA TION WARNING: THE DRAWER WARMER AND ITS PARTS ARE HOT. BE VERY CAREFUL WHEN OPERATING, CLEANING OR SERVICING THE DRAWER WARMER. CONTROLS (Fig. 1) Fig. 1 OPERATOR INDICATOR LIGHT – Lit when heat is supplied to drawer warmer. FULL RANGE THERMOSTAT – Acts as the ON/OFF switch to the drawer warmer system.
– 10 – OPERATING DRAWER WARMER 1. Connect electric power supply. 2. Turn thermostat knob to desired setting. • Heating elements begin heating. • Operator indicator light is lit. 3. Thermometer will indicate the interior temperature of the drawer warmer.
– 11 – CLEANING WARNING: UNPLUG ELECTRICAL POWER SUPPLY BEFORE CLEANING. Clean drawer warmer interior with a mild soap and water whenever food spill occurs. Never use harsh chemicals or abrasive pads to clean drawer warmer. Daily 1. Allow drawer warmer to cool before cleaning.
– 12 – NOTES FORM 31086 Rev. A (12-98) PRINTED IN U.S.A..
An important point after buying a device Vulcan-Hart VW2DB ML-126511 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart VW2DB ML-126511 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart VW2DB ML-126511 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart VW2DB ML-126511 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart VW2DB ML-126511 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart VW2DB ML-126511, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart VW2DB ML-126511.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart VW2DB ML-126511. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart VW2DB ML-126511 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
