Instruction/ maintenance manual of the product ML-114544 Vulcan-Hart
Go to page of 8
INSTALLATION & OPERATION MANUAL FOR Charbroilers MODELS MLS VCCB25 ML-114540 VCCB30 ML-114541 VCCB36 ML-114542 VCCB47 ML-114543 VCCB60 ML-114544 VCCB72 ML-114545 www.vulcanhart.com MODELS MLS SCB25 ML-767100 SCB30 ML-767101 SCB36 ML-767102 SCB47 ML-767103 SCB60 ML-767104 SCB72 ML-767105 www.
IMPORTANT FOR YOUR SAFETY THIS MANUAL HAS BEEN PREPARED FOR PERSONNEL QUALIFIED TO INSTALL G AS EQUIPMENT , WHO SHOU LD PERFORM THE INITIAL FIELD START-UP AND ADJUSTMENTS OF THE EQUIPMENT COVERED BY THIS MANUAL. POST IN A PROMINENT LOCATION THE INSTRUCTIONS TO BE FOLLOWED IN THE EVENT THE SMELL OF GAS IS DETECTED .
- 3 - INSTALLATION, OPERATION AND CARE OF GAS COUNTERTOP CHARBROILERS GENERAL Gas Countertop C harbroiler s are designed for commercial use only an d feature f ast, efficient ga s heat. Eac h burner is co ntrolled b y an adjustabl e gas valve. Cast radi ants are located dire ctly above each burn er to maintain unifo rm temperatur e.
LOCATION The installati on location must be kept free and clear of combustibles. Do not obstruct the flow of comb ustion and ventilation ai r. DO NOT install the charbroile r adjacent t o open burners or f ryers.
LEVELING If the charb roiler is equipped with legs or is mou nted on the optio nal stand equi pped with legs, turn the fe et at the botto m of the legs in or o ut to level the bro iler in the final installed locat ion. If the br oiler is mounted on t he optional stand equip ped with casters, position th e charbroi ler on a level floor.
GAS PRESSURE REGULATO R INSTALLATION Gas regulator p ressure is pres et at 5” Water C olumn (W.C.) fo r natural gas, and 10” W.C. for propane ga s. No further ad justment should be requir ed. Install the reg ulator as close to t he broiler on the gas supply lin e as possible.
OPERATION WARNING : THE C HARBROILER AND ITS PARTS AR E HOT. USE CARE WHEN OPERATING, CLEANING, OR SERVICING THE CHARBROILER. OFF ON CONTROLS (Fig. 2) BURNER VALVES Fig. 2 All orifices are of the fixed type and require no adjust ment. Standing p ilots should b e adjusted t o provide a slight yellow tip on the flam e.
- 8 - CLEANI NG Scrape top grates thorou ghly so grease flows t o trough and grease draw er uninhibited. This prevents fl are ups. Top grates may be immersed in commercia l cleaning compound ov ernight. In t he morning, rinse with hot water to re move any residu es of cleanin g compound.
An important point after buying a device Vulcan-Hart ML-114544 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vulcan-Hart ML-114544 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vulcan-Hart ML-114544 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vulcan-Hart ML-114544 you will learn all the available features of the product, as well as information on its operation. The information that you get Vulcan-Hart ML-114544 will certainly help you make a decision on the purchase.
If you already are a holder of Vulcan-Hart ML-114544, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vulcan-Hart ML-114544.
However, one of the most important roles played by the user manual is to help in solving problems with Vulcan-Hart ML-114544. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vulcan-Hart ML-114544 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
