Instruction/ maintenance manual of the product F1DZ104T Belkin
Go to page of 16
OmniView Control up to four computers from one PS/2 console KVM Switch U ser Manual SE Plus Series F1DZ102T F1DZ104T Belkin Components B .V . Starparc Building • Boein g Avenue 333 1119 PH Schiphol-Rijk • The N etherlands T el: +31 (0) 20 654 7300 Fax: +31 (0) 20 654 7349 Belkin Components, Ltd.
Congr atulation s on your purchase o f this Belkin OmniView SE Plus Seri es KVM Switch (the Switch). Our diverse lin e of KVM soluti ons e xemplifi es the Belkin commitmen t to deliverin g high-qu ality , dur able prod ucts at a r easonable pri ce .
OVERVIEW 3 OVERVIEW 2 Direct-A ccess P ort Selector s Direct-access port selectors , located convenien tly on th e fron t face of the Switch, allow f or simple , m anu al port-selection. Each button contr ols a port. The B ANK scr oll buttons located on th e fron t pan el of the Switch let you select d aisy-chained switch es .
5 OVERVIEW OVERVIEW 4 Equipment Requirements Cables To connect to th e Switch, each PS/2 computer requir es on e VGA cable , one PS/2 k eyboard cable , and one PS/2 m ouse cable . Keyboar d and m ouse cables must have PS/2 m ale-to-PS/2 male conn ectors.
7 OVERVIEW OVERVIEW 6 Unit Display Diagrams Slave Input M aster Input/Slave Output Direct-access port selector LED for selected port id entificati on Manu al BANK scroll buttons 7-segment LED f or sel.
OVERVIEW 8 P art No.: F1DZ102T , F1DZ104T Pow er: 12V DC, 1A AC power ad apter with center-pin positive polarity Daisy-Chain: M aximum o f 4 KVM switches PCs Supported: 2 (F1DZ102T) 4 (F1DZ104T) Ke yboard Emulation: PS/2 Mouse Emulation: PS/2 Monitor Supported: VGA, SVG A, MultiSyn c, an d LCD (option al adapter m ay be r equir ed) Max.
INST ALLA TION 11 Single KVM Switch Installation This section pr ovid es complete instru ction s for th e har dwar e setup of a single SE Plus Seri es KVM Switch. PS/2 Installation: Ke yboard, Video, and Mouse Connections Connect the Console to the KVM Switch 1.
INST ALLA TION 13 USB Installation Boot the computer you wish to conn ect via U SB as you would norm ally with the k eyboard , monitor , and mouse conn ected directly to th e computer . After the oper ating system finish es loading, conn ect the Switch to the U SB computer using th e USB A -to-B cable that is part of your USB KVM cable .
INST ALLA TION 15 DIP Switch Configuration Chart DIP SWIT CH# BANK ADDRESS 123 4 56 ON ON ON ON ON ON BANK 00 MASTER (d efault) ON ON OFF ON ON ON BANK 01 SLA VE ON ON ON OFF ON ON BANK 02 SLA VE ON ON OFF OFF ON ON BANK 03 SLA VE Note: “On” is down position.
INST ALLA TION 17 Note: If the Switches do not enumerate correctly , reset the Master switch (BANK 00) by simultaneously pressing the “B ANK Up” and “BANK Down” buttons. Y ou can also reset the Master switch to detect newly added Slave switches.
USING YOUR S WITCH 19 Y ou can switch directly to any port by en tering th e two-digit B ANK add ress f ollowed by th e two-digit n umber of th e port you wish to access. For ex ample , if you press “Scr oll Lock”, “Scroll Lock”, “00”, “02”, th e Switch will switch to the computer on port 2 located on B ANK 00.
USING YOUR KVM S WITCH 21 Connecting Computers 1. Connect a k eyboard , monitor , and mouse to th e computer you prepar ed f or firm ware upd ates. I t must run Win dows XP , 2000, NT , 95, 98, or Me . 2. Connect th e power adapter to th e Switch. 3. Connect th e custom flash cable (DB25 male-to-RJ45, in clud ed with purchase).
23 FA Q s Q: What is the m aximum vi deo r esolution that th e Switch supports? A: The advan ced vid eo circuit in th e Switch supports a maxim um r esoluti on of 2048x1536@85Hz. Q: What vid eo band wid th does th e Switch support? A: The Switch supports 400MHz o f vid eo band wid th.
General My computer does not boot when connected to the Swit ch but works fine when I connect the keyboar d, video, and mouse directly t o the computer . • Mak e sure that th e keyboar d and m ouse cables are conn ected tigh tly between the Switch an d the computer .
TROUBLESHOOTING 27 The computer boots up, but the mouse does not work. • Mak e sure th e mouse is plugg ed in properly . • Mak e sure th e mouse works wh en directly plugg ed into th e computer . Rebooting m ay be necessary wh en trying this . • T ry a differen t mouse .
W ARRANTY , FCC , CE, ICES ST ATEMENT 28 FCC Statement DECLARA TION OF CONFORMITY WITH FCC RULES FOR ELECTROMAGNETIC COMP A TIBILITY We, Belkin Corporation, o f 501 West W aln ut Street, Compton, CA 9.
An important point after buying a device Belkin F1DZ104T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin F1DZ104T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin F1DZ104T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin F1DZ104T you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin F1DZ104T will certainly help you make a decision on the purchase.
If you already are a holder of Belkin F1DZ104T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin F1DZ104T.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin F1DZ104T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin F1DZ104T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
