Instruction/ maintenance manual of the product F1DW101AEAAU Belkin
Go to page of 52
xxxxxx 2 Quick Installation Guide, Guide d’installation rapide, Installationsanl eitung, Beknopte installatiehandleiding, Guía de instalación rápida, Guida di installazione rapida F1DW101AeaAU OmniView ® Quad-Bus Server Interf ace Module, USB EN FR NL ES DE IT S t a r t H e r e P74940_F1DW101AeaAU_QIG.
P74940_F1DW101AeaAU_QIG.indb 1 9/1/07 5:18:48 pm.
Quick Installation Guide F1DW101AeaAU OmniView ® Quad-Bus Server Interf ace Module, USB EN FR NL ES DE IT S t a r t H e r e P74940_F1DW101AeaAU_QIG.indb 3 9/1/07 5:18:54 pm.
P74940_F1DW101AeaAU_QIG.indb 4 9/1/07 5:18:56 pm.
Package Contents 5 Package Contents OmniView Quad-Bus Server Interface Module, USB (F1DW101AeaAU) CA T5e Patch Cable, 6 ft. (A3L791x06-BLU) Quick Installation Guide P74940_F1DW101AeaAU_QIG.
6 Installing your Server Interface Module Step 1 Make sure your OmniView Quad-Bus KVM-over -IP or CA T5 KVM Switch is properly installed and is powered off. Step 2 Make sure your server is powered off. Inst alling your Serv er Interf ac e Modul e P74940_F1DW101AeaAU_QIG.
Installing your Server Interface Module 7 Step 3 Connect the module’ s VGA connector to the monitor port on your server . Step 4 Plug in the USB connector to an available USB port on your server .
8 Installing your Server Interface Module Step 5 Connect the Quad-Bus KVM-over -IP or CA T5 KVM Switch to the Server Interface Module using the included Belkin CA T5e Patch Cable or another CA T5 cable. Server Step 6 Repeat steps 2 through 5 for each additional USB server you wish to connect.
OmniView ® Quad-Bus Server Interf ace Module, USB P74940ea © 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Guide d’installation rapide F1DW101AeaAU Modul e d’interfac e serveur Quad-Bus OmniView ® , USB EN FR NL ES DE IT C o m me nc e z ic i P74940_F1DW101AeaAU_QIG.
P74940_F1DW101AeaAU_QIG.indb 12 9/1/07 5:19:07 pm.
Contenu de l’emballage 13 Contenu de l ’emballage Module d’interface serveur Quad-Bus OmniView , USB (F1DW101AeaAU) Câble de raccordement CA T5e, 1,8 m (A3L791x06-BLU) Guide d’installation rapide P74940_F1DW101AeaAU_QIG.
14 Installation du Module d’interface serveur Étape 1 Assur ez-vous d’abord que le switch KVM-sur -IP ou CA T5 Quad-Bus OmniView est correctement installé et hors tension. Étape 2 Assurez-vous que votre serveur est éteint. Ins tallation du Modul e d’interf ac e serv eur P74940_F1DW101AeaAU_QIG.
Installation du Module d’interface serveur 15 Étape 3 Branchez le connecteur VGA du module au port moniteur de votre serveur . Étape 4 Branchez le connecteur USB à un port USB libre sur le serveur .
16 Installation du Module d’interface serveur Étape 5 Branchez le Switch KVM-sur -IP ou CA T5 Quad-Bus au Module d’interface serveur à l’aide du Câble de raccordement CA T5e Belkin ou un autre câble CA T5. Server Étape 6 Répétez les étapes 2 à 5 pour chaque ordinateur USB supplémentaire que vous souhaitez connecter .
P74940_F1DW101AeaAU_QIG.indb 17 9/1/07 5:19:11 pm.
Modul e d’interfac e serveur Quad-Bus OmniView ® , USB P74940ea © 2006 Belkin Corporation. T ous droits réservés. T outes les raisons commerciales sont des marques déposées de leurs fabricants respectifs. Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, Royaume-Uni +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Installationsanl eitung F1DW101AeaAU OmniView ® Quad-Bus Server- Schnittstell enmodul, USB EN FR NL ES DE IT S t a r t P74940_F1DW101AeaAU_QIG.indb 19 9/1/07 5:19:14 pm.
P74940_F1DW101AeaAU_QIG.indb 20 9/1/07 5:19:16 pm.
V erpackungsinhalt 21 V erpackungsinhalt OmniView Quad-Bus Server- Schnittstellenmodul, USB (F1DW101AeaAU) CA T5e Patch-Kabel, 1,80 m (A3L791x06-BLU) Installations- anleitung P74940_F1DW101AeaAU_QIG.
22 Installation des Server -Schnittstellenmoduls Schritt 1 Stellen Sie sicher , dass Ihr OmniView Quad-Bus KVM-over -IP oder CA T5 KVM-Switch ordnungsgemäß installiert und ausgeschaltet ist. Schritt 2 Stellen Sie sicher , dass der Server abgeschaltet ist.
Installation des Server -Schnittstellenmoduls 23 Schritt 3 Schließen Sie den VGA-Stecker an den Bildschirmanschluss am Server an. Schritt 4 Schließen Sie den USB-Stecker an einen freien USB-Anschluss des Servers an.
24 Installation des Server -Schnittstellenmoduls Schritt 5 Schließen Sie den Quad-Bus KVM-over -IP oder den CA T5 KVM- Switch mit dem enthaltenen CA T5e-Patchkabel von Belkin oder einem anderen CA T5-Kabel an das Server -Schnittstellenmodul an. Server Schritt 6 Wiederholen Sie Schritt 2 bis 5 für jeden weiteren anzuschließenden USB-Server .
P74940_F1DW101AeaAU_QIG.indb 25 9/1/07 5:19:21 pm.
OmniView ® Quad-Bus Server- Schnittstell enmodul, USB P74940ea © 2006 Belkin Corporation. Alle Rechte vorbehalten. Alle Produktnamen sind eingetragene Marken der angegebenen Hersteller . Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, Großbritannien +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Beknopte installatiehandl eiding F1DW101AeaAU OmniView ® Quad-Bus server-interf acemodul e, USB EN FR NL ES DE IT H i e r be g i nn e n P74940_F1DW101AeaAU_QIG.
P74940_F1DW101AeaAU_QIG.indb 28 9/1/07 5:19:26 pm.
Inhoud van de verpakking 29 Inhoud van de v erpakking OmniView Quad-Bus server- interfacemodule, USB (F1DW101AeaAU) CA T5e-patchkabel, 1,8 m (A3L791x06-BLU) Beknopte installatie- handleiding P74940_F1DW101AeaAU_QIG.
30 Installatie van de server -interfacemodule Stap 1 Zor g ervoor dat de OmniView Quad-Bus KVM-over -IP-switch of de CA T5 KVM-switch correct geïnstalleerd en uitgeschakeld is. Stap 2 Zorg ervoor dat de server uitgeschakeld is. Ins tallatie van de serv er- interf ac emodul e P74940_F1DW101AeaAU_QIG.
Installatie van de server -interfacemodule 31 Stap 3 Sluit de VGA-stekker van de module aan op de monitorpoort van de server . Stap 4 Bevestig de USB-stekker in een vrije USB-poort van de server .
32 Installatie van de server -interfacemodule Stap 5 Sluit de Quad-Bus KVM-over -IP-switch of de CA T5 KVM-switch met de meegeleverde CA T5e-patchkabel of een andere CA T5-kabel van Belkin aan op de server -interfacemodule. Stap 6 Herhaal stap 2 tot 5 voor elke extra USB-server die u wilt aansluiten.
P74940_F1DW101AeaAU_QIG.indb 33 9/1/07 5:19:32 pm.
OmniView ® Quad-Bus server-interf acemodul e, USB P74940ea © 2006 Belkin Corporation. Alle rechten voorbehouden. Alle handelsnamen zijn geregistr eerde handelsmerken van de betreffende rechthebbenden. Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, V erenigd Koninkrijk +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
Guía de instalación rápida F1DW101AeaAU Módul o de Interf az de Servidor Quad-Bus OmniView ® , USB EN FR NL ES DE IT C o m i e nc e a q u í P74940_F1DW101AeaAU_QIG.
P74940_F1DW101AeaAU_QIG.indb 36 9/1/07 5:19:37 pm.
El packincluye 37 El pack incluye Módulo de Interfaz de Servidor Quad-Bus OmniView , USB (F1DW101AeaAU) Cable de red CA T5e de 1,8 m (A3L791x06-BLU) Guía de instalación rápida P74940_F1DW101AeaAU_QIG.
38 Instalación del Módulo de Interfaz de Servidor Paso 1 Asegúrese de que su Conmutador KVM a través de IP Quad-Bus OmniView o su Conmutador KVM CA T5 esté instalado y apagado correctamente. Paso 2 Asegúrese de que su servidor esté apagado. Ins talación del Módul o de Interf az de Servidor P74940_F1DW101AeaAU_QIG.
Instalación del Módulo de Interfaz de Servidor 39 Paso 3 Conecte el conector VGA del módulo al puerto del monitor en el servidor . Paso 4 Conecte el conector USB a uno de los puertos USB disponibles en el servidor . Servidor P74940_F1DW101AeaAU_QIG.
40 Instalación del Módulo de Interfaz de Servidor Paso 5 Conecte el Conmutador KVM a través de IP Quad-Bus o el Conmutador KVM CA T5 al Módulo de Interfaz de Servidor mediante el cable de red CA T5e incluido u otro cable CA T5. Paso 6 Repita los pasos del 2 a 5 para cada ordenador USB que desee conectar .
P74940_F1DW101AeaAU_QIG.indb 41 9/1/07 5:19:42 pm.
Módul o de Interf az de Servidor Quad-Bus OmniView ® , USB P74940ea © 2006 Belkin Corporation. T odos los derechos reservados. T odos los nombres comerciales son marcas registradas de los respectivos fabricantes mencionados.
Guida di installazione rapida F1DW101AeaAU Modul o di interf accia server OmniView ® Quad-Bus, USB EN FR NL ES DE IT I n i z i a d a q u i P74940_F1DW101AeaAU_QIG.
P74940_F1DW101AeaAU_QIG.indb 44 9/1/07 5:19:47 pm.
Contenuto della confezione 45 Contenuto della c onfezione Modulo di interfaccia server OmniView Quad-Bus, USB (F1DW101AeaAU) Cavo patch CA T5e, 1,8 m (A3L791x06-BLU) Guida di installazione rapida P74940_F1DW101AeaAU_QIG.
46 Installazione del modulo di interfaccia server F ase 1 Accertarsi che lo switch KVM CA T5 o KVM-over -IP OmniView Quad-Bus sia correttamente installato e spento. F ase 2 Assicurarsi che il server sia spento. Inst allazione del modul o di interf ac cia serv er P74940_F1DW101AeaAU_QIG.
Installazione del modulo di interfaccia server 47 F ase 3 Collegare il connettore VGA del modulo alla porta del monitor sul server . F ase 4 Collegare il connettore USB ad una porta USB disponibile sul server .
48 Installazione del modulo di interfaccia server F ase 5 Collegar e lo switch KVM CA T5 o KVM-over -IP Quad-Bus al modulo di interfaccia server usando il cavo patch CA T5e Belkin in dotazione o un altro cavo CA T5. Server F ase 6 Ripetere le fasi 2-5 per ogni altro server USB che si desidera collegare.
P74940_F1DW101AeaAU_QIG.indb 49 9/1/07 5:19:53 pm.
Modul o di interf accia server OmniView ® Quad-Bus, USB P74940ea © 2006 Belkin Corporation. T utti i diritti riservati. T utti i nomi commerciali sono marchi commerciali registrati dei rispettivi produttori indicati.
P74940_F1DW101AeaAU_QIG.indb 9 9/1/07 5:19:01 pm.
P74940_F1DW101AeaAU_QIG.indb 52 9/1/07 5:19:56 pm.
OmniView ® Quad-Bus Server Interf ace Module, USB P74940ea © 2006 Belkin Corporation. All rights reserved. All trade names are registered trademarks of respective manufacturers listed. Belkin Ltd. Express Business Park, Shipton W ay Rushden, NN10 6GL, United Kingdom +44 (0) 1933 35 2000 +44 (0) 1933 31 2000 fax Belkin B.
An important point after buying a device Belkin F1DW101AEAAU (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Belkin F1DW101AEAAU yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Belkin F1DW101AEAAU - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Belkin F1DW101AEAAU you will learn all the available features of the product, as well as information on its operation. The information that you get Belkin F1DW101AEAAU will certainly help you make a decision on the purchase.
If you already are a holder of Belkin F1DW101AEAAU, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Belkin F1DW101AEAAU.
However, one of the most important roles played by the user manual is to help in solving problems with Belkin F1DW101AEAAU. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Belkin F1DW101AEAAU along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
