Instruction/ maintenance manual of the product MD6430 Vonage
Go to page of 2
Handset Layout Base Layout NOTE: If the desired number/record was previously stored in any one of the ten VIP melody records, DUPLICA TE NUMBER shows in the display . Changing a Stored VIP Melody Record Use the Storing VIP Melody procedure to change the number of a selected record and replace the old phone number with new phone number .
3. Use the touch tone pad on the handset to select 1, 2 or 3, or use the CID/ VOL ( or ) button to scroll to your selection. “ 1HI ” is the default setting. 4. Press #P AUSE button again to save and display the new selection for a few seconds.
An important point after buying a device Vonage MD6430 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vonage MD6430 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vonage MD6430 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vonage MD6430 you will learn all the available features of the product, as well as information on its operation. The information that you get Vonage MD6430 will certainly help you make a decision on the purchase.
If you already are a holder of Vonage MD6430, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vonage MD6430.
However, one of the most important roles played by the user manual is to help in solving problems with Vonage MD6430. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vonage MD6430 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
