Instruction/ maintenance manual of the product DA-3600Pro2 VocoPro
Go to page of 24
DA-3600Pro 200W Digital Karaoke Mixing Amplifier owner's manual Excellent Features: • 100W + 100W Maximum Power Output at 8 Ohms • 135W + 135W Maximum Power Output at 4 Ohms • Pro Echo Circ.
DA-3600 Pro Cautions and W arnings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Welcome . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . Listening for a Lifetime .
1 Safety Instructions CAUTION RISK OF SHOCK CAUTION: T o reduce the risk of electric shock, do not remove cover (or back). No user- serviceable parts inside. Only refer servicing to qualified service personnel. W ARNING T o reduce the risk of fire or electric shock, do not expose this unit to rain or moisture.
2 CAUTION The apparatus is not disconnected from the AC power source so long as it is connected to the wall outlet, even if the apparatus itself is turned off. T o fully insure that the apparatus is indeed fully void if residual power , leave unit disconnected from the AC outlet for at least fifteen seconds.
3 W elcome…. Thank you for purchasing the DA-3600Pro from V ocoPro, your ultimate choice in Karaoke entertainment! With years of experience in the music entertainment business, V ocoPro is a leading.
4 Listening For A Lifetime Selecting fine audio equipment such as the unit you’ve just purchased is only the start of your musical enjoyment. Now it’s time to consider how you can maximize the fun and excitement your equipment offers.
5 Before Getting Started: Things to Consider It is very important to read the following instructions prior to starting any installation procedures. Doing so will ensure a correct installation and may save you some time as well.
6 The DA-3600 Pro's Features Specifications Amplifier Maximum Output: 135W X 2 (4ohm) S/N ratio: 75dB (without karaoke) THD: 0.08% Frequency Response: 20Hz--18KHz MIC T one T reble 10kHz Midrange.
Front Panel Descriptions 7 1 2 3 4 1. 1/’4" MICROPHONE jacks (1,2 and 3) – Plug microphones with a 1⁄4" plug to these jacks . 2. +20dB GAIN pads – Press pad to an inward position to have the microphone output receive a +20dB GAIN boost.
Front Panel Descriptions 8 8. MID. control – This control increases/decreases the amount of MID-RANGE frequency response applied to the MIC channels. T urn clockwise to increase the MID-RANGE frequency response and counter-clockwise to decrease the MID-RANGE frequency response.
Front Panel Descriptions 9 15. ECHO DEL. control – This control is also a facet of the Digital Echo process. DELA Y adjusts the total beginning and ending length of each echo interval. As more DELA Y is applied to the ECHO ef fect, each ECHO interval will become longer in time.
Front Panel Descriptions 10 21. MASTER VOL. control – This control increases/decreases the MASTER VOLUME level of all audio output from the DA-3600 Pro. T urn clockwise to increase the MASTER VOLUME level and counter-clockwise to decrease the MASTER VOLUME level.
Rear Panel Descriptions 11 1. VOL T AGE SELECTOR toggle – This selector toggles between 1 10-120V and 220-240V power settings. NOTE: Please ensure this toggle is set to the correct position, matching the receiving AC outlets power supply before plugging it in an operating it.
Rear Panel Descriptions 12 7. MIC OUTPUT jacks – These jacks export MIC 1, 2 and 3 OUTPUT only , bypassing the source audio signal in order to provide connection to vocal effects units. Connect a paired RCA-ended patch cable from these jacks to appropriate INPUT jacks on the vocal ef fects unit.
13 Getting Connected Connection Diagram Connecting Y our Source Players Up to two source players can be connected to the DA-3600 Pro. For each source player you will need a stereo RCA patch cable.
14 Getting Connected Connecting an Amplifier , External Sound System or Mixing Device The DA-3600 Pro’s LINE OUT jacks can be used to connect to a second power amplifier , an external sound system or mixing device.
15 Getting Connected Connecting Speakers Either using MDP (banana plug) speaker cables or standard speaker wires, connect speakers paying attention to correctly match the polarities (+/-). Connect speakers rated no lower that 4-Ohms to the DA-3600 Pro.
16 Switching A/V Channels Since the DA-3600 Pro has 2 A/V inputs, you can switch between them via the INPUT SELECTOR button. After your source players are connected to the DVD and CDG channels, press .
17 Balancing a Microphone Channel When adjusting Mic levels, it is recommended to do so in this order: 1. First adjust the MIC VOLUME control to approximately 50%. (Shown on Fig. 1) 2. Then balance the LOW , MID and HIGH controls to approximately 40-60%.
18 T roubleshooting PROBLEMS CAUSE SOLUTIONS Change Input Selector to the correct current playing source Raise Music Master V olume level to an appropriate level Connect the Loop Bars horizontally (L-.
19 Recommended V ocoPro Gear Professional CD/CD+ Graphic Player • Pro CD Player W/ CD + Graphics Decoder • Pitch Control T o 12% (+) Or (-) • Scramble protection during pitch changes • Single T rack Mode • Frame Search W/ Jog Dial • 4-Speed Fast Forward/Rewind Shuttle.
20 Recommended V ocoPro Gear 2 Space 600W Professional Power Amplifier • 300W + 300W RMS • 600W + 600W Max • THD: 0.05% • Frequency Response: 20HZ-20KHZ Signal to Noise • 1/4" or XLR Inputs • Input Ratio: Less than 100DB • Input Sensitivity: 1.
21 Recommended V ocoPro Gear 5" TFT LCD Color Monitor • TFT LCD Color Monitor • Audio/Video Input • 3 W atts Stereo Speakers • Headphone Output With V olume Control • Color/Brightness A.
22 Recommended V ocoPro Gear Professional 8" 3 W ay V ocal Speakers • 3 W ay 8" Karaoke V ocal Speakers (Sold in Pair) • Design for Karaoke Studio or Singers Monitor • Power Rating: 18.
An important point after buying a device VocoPro DA-3600Pro2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VocoPro DA-3600Pro2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VocoPro DA-3600Pro2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VocoPro DA-3600Pro2 you will learn all the available features of the product, as well as information on its operation. The information that you get VocoPro DA-3600Pro2 will certainly help you make a decision on the purchase.
If you already are a holder of VocoPro DA-3600Pro2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VocoPro DA-3600Pro2.
However, one of the most important roles played by the user manual is to help in solving problems with VocoPro DA-3600Pro2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VocoPro DA-3600Pro2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
