Instruction/ maintenance manual of the product M300 Bel Canto
Go to page of 10
S300/M300 e.One ™ Series Audio Power Amplifiers Bel Canto Design, L TD. 212 Third A venue North Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.
page 2 © 2005 bel canto design, Ltd. T ABLE OF CONTENTS Bel Canto Design Statement . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .3 Design Features . . . . . . . . . . . . . . . . . . . . . . . . . .
page 3 © 2005 bel canto design, Ltd. Bel Canto Design audio products are designed to bring you closer to the power and beauty of your music. Our goal is simply to provide the most expressive and powerful musical experience outside of the live event and bring some of the greatest musicians and their performances into the intimacy of your home.
W arm Up The amplifier’ s sonic per for mance will start to stabilize after approximately 100 hours of continuous power up. W e recommend that the amplifier remains pow- ered for optimum performance. The e.One Series S300/M300 are single and dual-mono amplifiers designed to deliver up to 150 watts into 8 ohm loads and 300 watts into 4 ohm loads.
War ning! Do not connect power to this amplifier yet! This amplifier , like any electrical component, can be danger ous and cause injury unless correct handling pr ocedur es are observed and used. Befor e powering this preamplifier it is necessary to read and follow proper procedures concer ning its setup and use.
S300 Rear Panel S300 Rear Panel Connections Never Connect Either the Positive or Negative Speaker Output to Any Ground Contact! Connecting any Speaker Output on the S300 to Ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty .
M300 Rear Panel M300 Rear Panel Connections Never Connect Either the Positive or Negative Speaker Output to Any Ground Contact! Connecting any Speaker Output on the M300 to Ground will cause the amplifier to go into protection and could damage the amplifier and void the warranty .
Front Panel Indicator Lamp The small blue LED lamp indicates that the power is connected to the amplifier and that the power switch is in the ON position. If the amplifier detects a fault or short circuit in the output connections then it will go into a pr otection mode and stop playing.
Specifications page 9 © 2005 bel canto design, Ltd. Power Output: . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 300W/channel into 4 ohms, 150W/channel into 8 ohms Minimum Load: . . . . . . . . . . . . . . . . . . . . .
Bel Canto Design, L TD. 212 Third A venue North Minneapolis, MN 55401 Phone: (612) 317.4550 Fax: (612) 359.9358 www .belcantodesign.com Info@belcantodesign.
An important point after buying a device Bel Canto M300 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bel Canto M300 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bel Canto M300 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bel Canto M300 you will learn all the available features of the product, as well as information on its operation. The information that you get Bel Canto M300 will certainly help you make a decision on the purchase.
If you already are a holder of Bel Canto M300, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bel Canto M300.
However, one of the most important roles played by the user manual is to help in solving problems with Bel Canto M300. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bel Canto M300 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
