Instruction/ maintenance manual of the product eVo200.2 Bel Canto
Go to page of 8
BelCantoDesign eVo200.2 Digital Power Processor Audio Power Amplifier User's Guide and Operating Information Bel Canto Design • 212 Third Avenue North–Suite 345 • Minneapolis, MN 55401 Phone: (612) 317.4550 • Fax: (612) 359.9358 • Email: Info@BelCantoDesign.
eVo200.2 Owner's Manual Page 2 eVo200.2 Digital Power Processor, Audio Power Amplifier The eVo200.2 is a dual configuration, stereo/mono power audio amplifier using a unique Bel Canto Design, eVo Digital Power Processor circuit architecture.
eVo200.2 Owner's Manual Page 3 Bel Canto grew from the quest to achieve the ultimate musical satisfaction from an audio system. This goal began with the discovery of the inherent sonic qualities and musical performance potential of a nearly forgotten technology, the single-ended triode amplifier.
eVo200.2 Owner's Manual Page 4 Design Features • High efficiency Digital Power Processing output stage for cool operation • Small signal analog processing • > 800 watts short term continuous power output capability in Mono mode • Optimized balanced and single-ended input stage • THD and IMD <0.
eVo200.2 Owner's Manual Page 5 Unpacking Unpacking The box containing your eVo200.2 contains the following parts: 1 - eVo200.2 audio power amplifier 1 - eVo200.2 User's Guide 1 - Power Cable for connection to utility power [6' 7" - 2 meters long] Carefully unpack each piece and check for shipping damage.
eVo200.2 Owner's Manual Page 6 Initial Setup Line Level Inputs Two inputs per channel are provided. The RCA jack is a standard input that accepts single- ended sources.
eVo200.2 Owner's Manual Page 7 Amplifier Placement eVo200.2 Placement Within Your System The most typical arrangement places the eVo200.2 on the lower shelf of a rack or shelf unit; some users prefer to have the eVo200.
eVo200.2 Owner's Manual Page 8 Warranty Information Please take a moment to fill out your warranty registration sheet. Returning this registration validates your warranty and allows us to send you information on product updates and new product development.
An important point after buying a device Bel Canto eVo200.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Bel Canto eVo200.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Bel Canto eVo200.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Bel Canto eVo200.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Bel Canto eVo200.2 will certainly help you make a decision on the purchase.
If you already are a holder of Bel Canto eVo200.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Bel Canto eVo200.2.
However, one of the most important roles played by the user manual is to help in solving problems with Bel Canto eVo200.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Bel Canto eVo200.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
