Instruction/ maintenance manual of the product 4X-FD7132 Vivotek
Go to page of 13
.
EN - 1 English Power off the Network Camera as soon as it is found smoking or smelt unusual. Contact your distributor when such cases happen. Keep the Network Camera away from the water . If the Network Camera is wet, power off immediately . Do not place the Network Camera around the heat sources, such as television or oven.
EN - 2 Do not place the Network Camera on unsteady surfaces. Do not touch the Network Camera when it's lightening. Do not disassemble the Network Camera. Do not drop the Network Camera. Do not insert any object into the Network Camera, such as needles.
EN - 3 English Software CD FD7132 W arranty card Screwdriver Alignment sticker Screws and I/O connector Quick installation guide Power adapter Package Contents 1.
EN - 4 Lens T ilt screw Built-in microphone PIR sensor IR LEDs Power cord socket Ethernet 10/100 RJ45 socket Indented reset button Audio Out Mic. In Ext.
EN - 5 English First, use the supplied screwdriver to detach the dome cover from the camera base. Then, follow the steps below to install the camera; either to a ceiling or to a wall. Ceiling mount Through the two holes on each side of the camera base, insert the supplied two screws to corresponding holes and secure them with a screwdriver .
EN - 6 Gener al Connection (without P oE) 1. If you have external devices such as sensors and alarms, make connections from gen- eral I/O terminal block. 2. Connect the camera to a switch via a Ethernet cable. 3. Connect the supplied power cable from the camera to a power outlet.
EN - 7 English non-PoE switch P o wer o v er Ether net (P oE) POWER COLLISION LINK RECEI VE PAR TITIO N 1 2 3 4 5 PoE switch no n- PoE s w i t ch POWER COLLISION LINK RECEI VE PAR TITIO N 1 2 3 4 5 When using a non-PoE switch Use a PoE power injector (optional) to connect between the camera and a non-PoE switch.
EN - 8 Network Camera Model No: FD7132 Made in T aiwan This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1)This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
EN - 9 English For further setup, please refer to user's manual on the software CD. Ready to Use 6 1. Access to the Network Camera from the Internet.
EN - 10 Based on the live image retrieved from the camera, adjust the camera lens by doing the following: Audio Out Mic. In Ext. Int. 1 2 3 4 I/O W T 8 N DO NOT over tighten the controllers. Doing so would damage the structure of camera lens. T o adjust the viewing angle 1.
EN - 1 1 English Attach the dome cover to camera. Secure the two dome screws with a screwdriver . Finally , make sure all parts of the camera are securely installed. The supplied screwdriver is exclusively designed to match the dome screws. In case you will need to adjust the lens at a later time, do not discard the screwdriver .
P/N: 625006600G V er .1.01 Copyright 2008 VIVOTEK INC. All right reserved..
An important point after buying a device Vivotek 4X-FD7132 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vivotek 4X-FD7132 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vivotek 4X-FD7132 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vivotek 4X-FD7132 you will learn all the available features of the product, as well as information on its operation. The information that you get Vivotek 4X-FD7132 will certainly help you make a decision on the purchase.
If you already are a holder of Vivotek 4X-FD7132, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vivotek 4X-FD7132.
However, one of the most important roles played by the user manual is to help in solving problems with Vivotek 4X-FD7132. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vivotek 4X-FD7132 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
