Instruction/ maintenance manual of the product T9500, TM181 Vision Fitness
Go to page of 8
Assembly Guide T9200, T9500, T9600, AND T9700 PLA TFORM TREADMILLS.
3 0 :0 0 0 1 STEP 2 STEP 5 STEP T o avoid possible damage to this Platform T readmill, please follow these assembly steps in the correct order . Before proceeding though, find your new Platform T read.
Screwdriver TOOLS, HARDW ARE, & P AR TS INCLUDED P AR TS BOX W ater Bottle, Qty: 1 Safety Magnet Key , Qty: 1 (except T9700 ) Color-coded Hardware Bags 8mm Allen Wrench 5mm L-Shaped Wrench.
HARDW ARE INCLUDED ORANGE BAG BLUE BAG M8 x 135L Bolts Quantity: 4 M8 x 15L Bolts Quantity: 4 M8 x 55L Flathead Bolts Quantity: 4 YELLOW BAG M4 x 12L Panhead Screws Quantity: 4 M8 x 20L Bolts Quantity.
5 1 STEP 1 STEP • Slide the rubber covers on to the left & right console supports, making sure that the lower cutout is facing inward. T9700: Slide the data cable down the right console support using the white wire tie as a guide.
6 3 0 :0 0 0 2 STEP 2 STEP • Mount the console to the console mast using four bolts (M8 x 15L) and tighten with the 5mm Allen wrench. NOTE: Push all extra data cable into the console mast. Make sure not to pinch or cut the data cable. • Mount the right-hand side mount handlebar to the console mast using two bolts (M8 x 135L).
7 4 STEP Once the T readmill is plugged in, you need to configure the T readmill and per form an auto-calibration to assure maximum per form ance. T9700S & T9700HRT CONSOLES: DO NOT ST AND ON THE BEL T WHEN PERFORMING THE AUTO-CALIBRA TION Once the treadmill is plugged in, you will need to configure and run auto-calibration.
8 500 South CP Avenue • P .O. Box 280 • Lake Mills, WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.
An important point after buying a device Vision Fitness T9500, TM181 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness T9500, TM181 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness T9500, TM181 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness T9500, TM181 you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness T9500, TM181 will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness T9500, TM181, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness T9500, TM181.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness T9500, TM181. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness T9500, TM181 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
