Instruction/ maintenance manual of the product T9000 Vision Fitness
Go to page of 7
Assembly Guide T9100 AND T9000 PLA TFORM TREADMILLS.
1 STEP 2 STEP 4 STEP T o avoid possible damage to this treadmill, please follow these assembly steps in the correct order . Before proceeding, find your new treadmill’ s serial number located on the front axle tube, and enter here: Please, refer to this number when calling for ser vice.
6 MM Allen Wrench Screwdriver 5 MM L-Shaped Wrench TOOLS & P AR TS INCLUDED P AR TS BOX W ater Bottle, Qty: 1 Color-coded Hardware Bags Owner’ s Guide Assembly Guide W arranty Card.
ORANGE BAG BLUE BAG PINK BAG HARDW ARE INCLUDED M8 x 20L Screws Quantity: 2 M8 x 65L Screw Quantity: 6 M8 x 20L Screws Quantity: 4 M5 x 20L Panhead Screw Quantity: 4.
5 1 STEP • Inser t one of the console supports into the console support bracket and secure with three bolts (M8x65L) in the side of the console support bracket. • Secure the rear of the console support using bolt (M8x20L) • Use the 5mm L-shaped Allen wrench to tighten all bolts.
6 3 STEP • Plug the large data cable into the large plug connection on the lower control board. Plug the small data cable into the small plug connection on the lower control board. • Install the motor cover . Secure the motor cover using the four (M5x20L) screws.
7 500 South CP Avenue • P .O. Box 280 • Lake Mills. WI 53551 toll free 1.800.335.4348 • phone 1.920.648.4090 • fax 1.920.648.3373 www .visionfitness.
An important point after buying a device Vision Fitness T9000 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vision Fitness T9000 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vision Fitness T9000 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vision Fitness T9000 you will learn all the available features of the product, as well as information on its operation. The information that you get Vision Fitness T9000 will certainly help you make a decision on the purchase.
If you already are a holder of Vision Fitness T9000, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vision Fitness T9000.
However, one of the most important roles played by the user manual is to help in solving problems with Vision Fitness T9000. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vision Fitness T9000 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
