Instruction/ maintenance manual of the product VP-8058L VIPowER
Go to page of 8
W e are your DataBridge T M http://www .vipower .com MODEL VP-8058 MODEL VP-8058L USB Docking Kit for use with Mobile Rack Removable Docking Modules with 3.
PROPRIETARY NOTICE ViPowER Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
USBdock Installation Manual 1 1-1 Intr oduction Congratulations on your purchase of the USBdock docking kit. The USBdock is an external USB interface adapter which is designed to enable hot-swap, plug-and-play operation of Enhanced IDE or ATA/ATAPI devices through the USB interface on any USB-equipped computer.
2 USBdock Installation Manual 1-1.2 ATA/ATAPI Device Compatibility • ATAPI removable drives: Iomega Zip 100MB/250MB and Clik!, LS-120 Super Floppy, Sony HiFD 200MB, MO drives, tape drives • Enhanced IDE and ATA hard drives: both 2.
USBdock Installation Manual 3 2-1 Installation The following sections will guide you through the setup of the USBdock for operation. • For Windows ® 98: Please refer to the software installation manual to install the Windows ® 98 driver.
4 USBdock Installation Manual LED Indicators Power Drive Activity 2-1.3 Setting Up the USBdock for Operation Perform the following steps (in the order given) to set up the USBdock with your peripheral device for operation: 1. For Windows 98 users : verify that the Windows 98 driver is installed.
USBdock Installation Manual 5 3. Using the +5V/+12V AC/DC Power Adapter: a. With the Power Select switch in the OFF (MIDDLE) position, plug in the 6-pin connector-end of the power adapter into its corresponding +5V/+12V power-in connector on the USBdock.
Printed on recycled paper. 3-1 Disconnecting the USBdock Perform the following steps to disconnect the USBdock from your computer. 1. Turn off the power by sliding the Power Select Switch to the MIDDLE OFF position. (Note that the drive icon will disappear from the computer screen.
An important point after buying a device VIPowER VP-8058L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VIPowER VP-8058L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VIPowER VP-8058L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VIPowER VP-8058L you will learn all the available features of the product, as well as information on its operation. The information that you get VIPowER VP-8058L will certainly help you make a decision on the purchase.
If you already are a holder of VIPowER VP-8058L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VIPowER VP-8058L.
However, one of the most important roles played by the user manual is to help in solving problems with VIPowER VP-8058L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VIPowER VP-8058L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
