Instruction/ maintenance manual of the product CD-ROM Box Enclosure VP-6020 VIPowER
Go to page of 9
W e are your DataBridge T M http://www .vipower .com Installation Guide CD-ROM Box Enclosur CD-ROM Box Enclosur CD-ROM Box Enclosur CD-ROM Box Enclosur CD-ROM Box Enclosur e e e e e For Models: VP-602.
PROPRIETARY NOTICE ViPowER Inc. makes no warranty of any kind with regard to this material, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
CD-ROM Box Enclosure Installation Guide 1 1-1 Intr oduction Congratulations on your purchase of one of the following CD-ROM Box Enclosures. Each CD-ROM Box Enclosure is an external enclosure which is designed to enable portable, hot-swap, plug-and-play operation of same-interface type 5.
2 CD-ROM Box Enclosure Installation Guide 1-1.1 CD-ROM Box Enclosure Features • Enables portable use of 5.25” internal model removable media devices with computers equipped with the same interface • Supports hot-swap and plug-and-play features of the selected interface • Model VP-6020: enables cross-platform interface compatibility of 5.
CD-ROM Box Enclosure Installation Guide 3 2-1.2 Assemble CD-ROM Box with CD-ROM Drive 1. Attach the two connectors from the end-panel assembly to the appropriate connectors on the CD-ROM drive.
4 CD-ROM Box Enclosure Installation Guide a. Attach the IDE 40-pin data cable from the end-panel to the 40-pin connector on the back of the CD-ROM drive. To ensure pin-1 to pin-1 connection, orient the cable so the colored stripe edge is closest to the power connector.
CD-ROM Box Enclosure Installation Guide 5 8. A vertical-holder stand is also provided as a convenient, space-saving method for setup of the CD-ROM Box Enclosure on your desktop. Simply align the grooves of the CD-ROM box with the guides on the stand and slide together.
6 CD-ROM Box Enclosure Installation Guide 3.1 Operation with a Docking Kit Perform the following steps (in the order given) to set up a Docking Unit with your CD-ROM Box Enclosure for operation. (Also refer to your Docking Kit’s installation manual for further details.
b. When using the Docking Kit’s interface for power, set switch to the RIGHT position. Note: it is recommended that you use the +5V /+12V power adapter whenever possible. 6. Connect the Docking Kit’s interface cable into the appropriate interface port on your computer; plug the other end into the connector port on the Docking Unit.
An important point after buying a device VIPowER CD-ROM Box Enclosure VP-6020 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought VIPowER CD-ROM Box Enclosure VP-6020 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data VIPowER CD-ROM Box Enclosure VP-6020 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, VIPowER CD-ROM Box Enclosure VP-6020 you will learn all the available features of the product, as well as information on its operation. The information that you get VIPowER CD-ROM Box Enclosure VP-6020 will certainly help you make a decision on the purchase.
If you already are a holder of VIPowER CD-ROM Box Enclosure VP-6020, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime VIPowER CD-ROM Box Enclosure VP-6020.
However, one of the most important roles played by the user manual is to help in solving problems with VIPowER CD-ROM Box Enclosure VP-6020. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device VIPowER CD-ROM Box Enclosure VP-6020 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
