Instruction/ maintenance manual of the product 7500 Viper
Go to page of 6
VIPER FLUSHING SERVICE INSTRUCTIONS (For Models AF3200, AF3250, AF3400, 7500 and most shop air powered Cooling System Service Units from VIPER and SOLAR) GENERAL OPERATING INFORMATION POWER: The following instructions are designed for units powered by shop air pumps.
ACCESSORIES: Each model includes a variety of cooling system service accessories, including differing sizes of Heater Hose Tees, Radiator Hose Adapters and Radiator Cap Adapters. Also available is an Overflow Evacuation Hose that enables evacuation of fluid from the overflow container.
Cold Car / Reverse Flow Service Method: Step 1 – Vehicle Connection 1. Remove radiator cap from vehicle and attach the proper Radiator Cap Adapter with male Quick Connect Insert installed.
Cold Car / Reverse Flow Service Method: Step 3a – Solvent Flush (using Cooling System Cleaner) Followed by Coolant Exchange Note: If not using a cooling system cleaner, skip to the next section. This optional procedure is recommended for long-life cooling systems that show signs of sludge accumulation.
Cold Car / Reverse Flow Service Method: Step 3b – Standard Coolant Exchange 1. Fill the New Coolant Tank with the correct amount of the proper type of coolant.
COOLANT SERVICE TIPS (Designed for VIPER AF3250, AF3400 and SOLAR 7500 – Good suggestions for all units) 1. The fluid required for “Primer Level” is 1 gallon. 2. During normal operation, the rate of fluid flow through a cooling system is approximately 3 – 4 quarts per minute.
An important point after buying a device Viper 7500 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viper 7500 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viper 7500 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viper 7500 you will learn all the available features of the product, as well as information on its operation. The information that you get Viper 7500 will certainly help you make a decision on the purchase.
If you already are a holder of Viper 7500, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viper 7500.
However, one of the most important roles played by the user manual is to help in solving problems with Viper 7500. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viper 7500 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
