Instruction/ maintenance manual of the product WINE-MATE VINO2500SSD Vinotemp
Go to page of 7
VINO2500-8500SSD Installer’s Instruction Federal law requires that WINE-M ATE split cooling systems be installed by an EPA certified refrigeration technician. WINE-MATE split system is shipped as components and is ready for use only after a certified refrigeration technici an has properly installed, evacuated, charged and tested the system.
- 1 - CAUTION: DO NOT SWITCH ON THE COMPRESSOR IF THE CONDENSING UNIT IS EQUIPPED WITH A LOW AMBIENT CO NDITION KIT UNTIL THE UNIT HAS BEEN PLUGGED IN FOR 24 HOURS. 2. Valve Operation (Condensing unit) BACK POSITION FRONT POSITION MIDDLE POSITION Fig.
- 2 - • There is a gravity drai n line and the unit shall be in stalled level or with a slight angle toward the drain c onnection. If rise-up is needed, a condensation pump must be used. 4. Air Sensor • The air sensor can be located in the wine room 5 ft above the floor or the return air area, but not the supply air area or air dead area.
- 3 - • Suction pressure: 30-35 psig • Head pressure: 125-150 psig at 70 -90 ° F ambient temperatures The line sizes and refrigerant charges are listed as follows.
- 4 - High superheat and normal to high subcooling l. Low suction pressure and n ormal head pressure High superheat and normal subcoo ling m. Low suction pressure and h igh head pressure High superheat and high subcooling n. Low suction pressure and high he ad pressure High superheat and high subcooling o.
- 5 - B. Dual Control Fig. 8 Dual Adjustable Pressure Control 8. Use of the encapsulated pressu re control (if applicable) Fixed suction pressure setting: Cut in = 32 psig; Cut out = 10 psig 9.
- 6 - 11. Condensing Unit Troubleshooting Unit not running a. Incorrect power supply b. Incorrect or loose wirings c. Failed components d. Liquid refrigerant in the compre ssor e. Low pressure switch sh utting do wn the unit a. Check for proper voltag e b.
An important point after buying a device Vinotemp WINE-MATE VINO2500SSD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vinotemp WINE-MATE VINO2500SSD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vinotemp WINE-MATE VINO2500SSD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vinotemp WINE-MATE VINO2500SSD you will learn all the available features of the product, as well as information on its operation. The information that you get Vinotemp WINE-MATE VINO2500SSD will certainly help you make a decision on the purchase.
If you already are a holder of Vinotemp WINE-MATE VINO2500SSD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vinotemp WINE-MATE VINO2500SSD.
However, one of the most important roles played by the user manual is to help in solving problems with Vinotemp WINE-MATE VINO2500SSD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vinotemp WINE-MATE VINO2500SSD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
