Instruction/ maintenance manual of the product WINE-MATE VINO-2500SSR Vinotemp
Go to page of 7
VINO2500-6500SSR Installer’s Instruction Federal law requires that WINE-M ATE split cooling systems be installed by an EPA certified refrigeration technician. WINE-MATE split system is shipped as components and is ready for use only after a certified refrigeration technici an has properly installed, evacuated, charged and tested the system.
- 1 - CAUTION: DO NOT SWITCH ON THE COMPRESSOR IF THE CONDENSING UNIT IS EQUIPPED WITH A LOW AMBIENT CO NDITION KIT UNTIL THE UNIT HAS BEEN PLUGGED IN FOR 24 HOURS. 2. Valve Operation (Condensing unit) BACK POSITION FRONT POSITION MIDDLE POSITION Fig.
- 2 - • There is a gravity drai n line and the unit shall be in stalled level or with a slight angle toward the drain c onnection. If rise-up is needed, a condensation pump must be used. 4. Air Sensor • The air sensor can be located in the wine room 5 ft above the floor or the return air area, but not the supply air area or air dead area.
- 3 - • It may use fan speed cont rol to adjust the system refrigeration performance to achieve 8-10 ° F differential between return air and supply air.
- 4 - g. Low suction pre ssure and low head pres sure High superheat and low subcooling h. Low suction pre ssure and low to normal head pres sure High superheat and high subcooling i. Low suction pressure a nd l ow head pressure Low subcooling j. Low suction pressure a nd l ow head pressure Low superheat and low subcooling k.
- 5 - B. Dual Control Fig. 7 Dual Adjustable Pressure Control 8. Use of the encapsulated pressu re control (if applicable) Fixed suction pressure setting: Cut in = 32 psig; Cut out = 10 psig 9.
- 6 - 11. Condensing Unit Troubleshooting Unit not running a. Incorrect power supply b. Incorrect or loose wirings c. Failed components d. Liquid refrigerant in the compre ssor e. Low pressure switch sh utting do wn the system a. Check for proper voltag e b.
An important point after buying a device Vinotemp WINE-MATE VINO-2500SSR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vinotemp WINE-MATE VINO-2500SSR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vinotemp WINE-MATE VINO-2500SSR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vinotemp WINE-MATE VINO-2500SSR you will learn all the available features of the product, as well as information on its operation. The information that you get Vinotemp WINE-MATE VINO-2500SSR will certainly help you make a decision on the purchase.
If you already are a holder of Vinotemp WINE-MATE VINO-2500SSR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vinotemp WINE-MATE VINO-2500SSR.
However, one of the most important roles played by the user manual is to help in solving problems with Vinotemp WINE-MATE VINO-2500SSR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vinotemp WINE-MATE VINO-2500SSR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
