Instruction/ maintenance manual of the product VT-26 Vinotemp
Go to page of 16
A PROUD H ERITAGE OF EXP ERIENCE & QUALITY Wine Cellar VT-26 OWNER’S MANUAL WWW.VINOTEMP.COM.
2 WWW.VINOTEMP.COM.
Your Wine Cellar This unit can be used for Storage an d/or Service. The unit has a glass door and soft interior light that you can leave on to elegantly display your wine. Serving Wines Storing wines at the proper temperatur e is important. To preserve them as long as possible, wine should be stored at approximately 55° Fahrenheit.
General Operating Instructions Remove all external and internal packag ing from your wine cellar. Be sure that all parts have been included before discarding any packaging materials. You may want to keep the box and packing materials for use at a later date.
Table of Contents Parts And Specifications .......................................... 6 Important Safety Instructions .................................. 7 Cord Instructions ................................................... 8 Wine Cellar Installation .
6 WWW.VINOTEMP.COM PARTS AND SPECIFICATIONS 1. Double-pane window 2. Grill 3. Adjustable leveling legs 4. Shelf 5. Cabinet 6. Control Panel 7. LED Temperature Indicator 8. Light Switch 9. Temperature Adjustment Type 1 Temp. Item Number VT-26 Bottle Capacity Approx.
IMPORTANT SAFETY INSTRUCTIONS When using an electrical appliance, basic precautions should be followed to reduce the risk of fire, elec tric shock, and personal injury. 1. Use this appliance only as describe d in this manual. Other uses are not recommended and may cause fire, electric shock or inj ury.
8 WWW.VINOTEMP.COM CORD INSTRUCTIONS For your protection, this unit should be properly grounded. Unit is equipped with a 3-conductor cord set that has a molded 3-prong grounding- type plug, and should be used in combination with a properly connected grounding-type outlet as shown in figure A.
OPERATING INSTRUCTIONS 1. Gently place/slide the racks in the wine cellar. 2. Determine the best temperature setting to use. 3. Place bottles inside the cooler. 4. Plug the power cord into a standard electrical outlet. 5. Limit the frequency of opening th e door to conserve energy and maintain proper storage temperature.
WINE RACK REMOVAL / INSTALLATION To prevent damaging the door gask et, make sure to have the door all the way open when pulling shel ves out of the rail compartment. To remove a rack from the cabinet: 1. Remove any bottles stored on the rack. 2. Remove the stopper from each si de and gently pull up on the rack, then take out the rack.
REVERSAL OF DOOR SWING The door of the wine cellar could be op ened either from the left or right side. The wine cellar is installed to open from the left side. To reverse, please do as follows: 1. Disconnect the power, take out all the wine bottles and lay the wine cellar back on the ground.
CLEANING AND CARE • Always unplug the wine cellar before cleaning. • Do not use benzene, scrubbing brushe s or chemical cleaners as these will damage the unit. • Use only a mild, nonabrasive cleans er to clean the exterior of the cabinet. • Clean the stainless steel door and handle by wiping with a warm water and baking soda solution.
TROUBLESHOOTING You can solve many common wine cella r problems easily, saving you the cost of a possible service call. Try th e suggestion below to see if you can solve the problem before contacting Vinotemp at info@vinotemp.com. SYMPTOM POSSIBLE CAUSE Door will not close properly.
TERMS OF SALE AND WARRANTY Vinotemp Inter national (“Seller”) and the person or entity that acquires these good s from Seller (“Purchaser”) hereby fully ag ree to the following terms and conditions of the sale: Shipping fees are t he responsibility of the Purchaser whether freight prepaid or fre ight collect.
SERVICE & IMPORTANT NOTICE Upon receipt and inspection of unit, th e supply cord must be replaced if it is damaged. Contact our customer service at 1-800-777-8466 or info@vinotemp.com. The manufacturer has a policy of cont inuous improvement on its products and reserves the right to change ma terials and specifications without notice.
17621 S. Susana Road Rancho Dominguez, CA 90221 www.vinotemp.com Vinotemp is a registered trademark of Vinotemp In ternational. All products, features, and servi ces are subject to change without notice. We cannot guarantee the accuracy of the contents of this document.
An important point after buying a device Vinotemp VT-26 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vinotemp VT-26 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vinotemp VT-26 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vinotemp VT-26 you will learn all the available features of the product, as well as information on its operation. The information that you get Vinotemp VT-26 will certainly help you make a decision on the purchase.
If you already are a holder of Vinotemp VT-26, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vinotemp VT-26.
However, one of the most important roles played by the user manual is to help in solving problems with Vinotemp VT-26. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vinotemp VT-26 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
