Instruction/ maintenance manual of the product VGBQ412T Viking
Go to page of 16
Viking Installation Guide Viking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA.
IMPORTANT: PLEASE READ AND FOLLOW • Before beginning, please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or plates from product. This may void the warranty • Please observe all local and national codes and ordinances.
BASIC SPECIFICATIONS T-SERIES GRILLS Description Cutout Width Cutout Depth Cutout Height Overall Width Overall Depth Gas Requirements Electrical Requirements Grill Burner Rating TilJSea r TM Burner Ra.
BASIC SPECIFICATIONS E-SERIES GRILLS Description Cutout Width Cutout Depth Cutout Height Overall Width Overall Depth ,Sas Requirements Electrical Requirements Maximum Amp Usage Still Burner Rating Tru.
GAS CONNECTION Verify the type of gas supply to be used, either natural or LP, and make sure the marking on the grill rating plate agrees with that of the supply. Never connect an unregulated gas line to the appliance. An installer supplied gas shut-off valve must be installed in an easily accessible location.
NATURAL FIXED PIPING CONNECTION Connection: Operating Pressure: Supply Pressure: Standard Residential 1/2" ID gas service line - 1/2" NPT male with 7/8" (2.2 cm) flare adapter. 4.0" W.C.R Nat. 6" to 10" W.C.R Nat. If in excess of 10" W.
LP/PROPANE FIXED PIPING CONNECTION Connection: Operating Pressure: Supply Pressure: Standard Residential 1/2" ID gas service line - 1/2" NPT male with 3/8" flare adapter. 10.0" W.C.R LP/Propane. 11" to 14" W.C.R Nat. If in excess of 14" W.
LP/PROPAN E TAN K CON N ECTION Outdoor grills orificed for use with LP/Propane gas come equipped with a high capacity hose/regulator assembly for connection to a standard 20 lb.
LEAK TESTING Although all gas connections on the grill are leak tested at the factory prior to shipment, a complete gas tightness check must be performed at the installation clue to possible mishandling in shipment or excessive pressure unknowingly being applied to the unit.
INSTALLATION PROCEDURES FOR BUILT-IN INSTALLATION 1. A minimum of 6" (15.2 cm) from the sides, or a minimum of 8" (20.3 cm) from the right side if there is a rotisserie motor, and a minimum of 24" (61.0 cm) from the back must be maintained from the grill above the cookin 9 surface to adjacent vertical combustible construction.
,, (15.2 cm) / / ._ A ,. n 0 0 _° o /, o°@ @0 / / / / MODEL Dim. A VGBQ300T/0302T 29 1/2" (74.9 cm) VGBQ300E VGIQ300T 29 1/2" (74.9 cm) VGIQ300E VGBQ410T/VGIQ410T 41 3/16" (104.6 cm) VGBQ410E/VGIQ410E VGBQ412T 41 3/16" (104.6 cm) VGBQ412E VGBQ530T/VGIQ530T 53 3/16" (135.
CUTOUT DIMENSIONS Model Dim. B VGBQ300T/0302T 28 518" (72.7 cm) VGBQ300E VGIQ300T 28 5/8" (72.7 cm) VGIQ300E VGBQ410T/VGIQ410T 40 1/4" (102.2 cm) VGBQ410E/VGIQ410E VGBQ412T 40 1/4" (102.2 cm) VG BQ412E VGBQ530TNGIQ530T 52 1/4" (132.
BURNER ADJUSTMENT Each burner is tested and adjusted at the factory prior to shipment; however, variations in the local gas supply may make it necessary to adjust the burners. The flames of the burners (except the rotisserie infrared burner) should be visually checked and compared with Fig.
Fig. 3 SIDE BURNERS (If applicable) °O o _[ ° I -1_ Air Shutters / Orifice Fig. 4 FLAME HEIGHT SIDE BURNERS (If applicable) 3/8" (.95 cm) Fig. 6 FLAME HEIGHT TruSear BURN ER 1/4" (.64 cm) Fig. 5 FLAME HEIGHT INFRARED BURNER 1/4" (.64 cm) .
ROTISSERIE SYSTEM The rotisserie motor is attached to the mounting bracket located on the right side of the grill frame. The rotisserie motor must be electrically grounded in accordance with local cod.
F20054H (PSO606VR).
An important point after buying a device Viking VGBQ412T (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking VGBQ412T yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking VGBQ412T - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking VGBQ412T you will learn all the available features of the product, as well as information on its operation. The information that you get Viking VGBQ412T will certainly help you make a decision on the purchase.
If you already are a holder of Viking VGBQ412T, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking VGBQ412T.
However, one of the most important roles played by the user manual is to help in solving problems with Viking VGBQ412T. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking VGBQ412T along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
