Instruction/ maintenance manual of the product RDECU256 Viking
Go to page of 8
Built-In Electric Cooktop Installation F20968B EN (021513) V iking Range Corporation 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product infor mation, call 1-888-VIKING1 (845-4641) or visit the Viking Website at vikingrange.
IMPORT ANT • Before beginning, please read these instructions completely and carefully . 3 – Please Read and Follow T able of Contents W arnings & Important Safety Instructions _______________.
Dimensions 5 IMPORT ANT 4 – Please Read and Follow CAUTION Be sure the electric power is off from the breaker box to the junction box until the cooktop is installed and ready to operate. The junction box should be connected to a suitable ground. W ARNING The electrical power to the unit must be shut off while line connections are being made.
7 6 Specifications Electric Cooktop Description RDECU106 30”W RDECU166 36”W RDECU256 45”W Overall width 30-3/4” (78.1 cm) 36-3/4” (93.3 cm) 45” (114.3 cm) Overall height from bottom 4-1/2” (11.4 cm) Overall depth from rear 21” (53.3 cm) Cutout width Minimum Maximum 28-7/8” (73.
9 8 Clearance Dimensions (Proximity to Cabinets) 36” min. (91.4 cm)* 13” max. ( 33.0 cm) 6” min. (15.2 cm)** 18” min. (45.7 c m ) 3-1/8” (7.9 cm) 0” min. (0.0 cm) 36” min. ( 91.4 cm) *Note: 36” minimum unless using a hood. **Note: Only applies to combustible surfaces.
11 10 Electrical Requir ements Electrical Requirements Check your local codes regar ding this unit. This cooktop is supplied with a 3-wire, A.C. 208Y/120 volt or 120/240 volt, 60 HZ electrical system. A white (neutral) is not needed for this unit. See next section for grounding instructions.
13 Installation 12 1 2 Neutral Green Black Red Lower cooktop into cutout. Connect the red and black leads from the unit conduit to the corresponding leads in the junction box.
15 14 Service & Registration Only authorized replacement parts may be used in perfor ming service on the appliance. All servicing should be referr ed to a qualified technician.
An important point after buying a device Viking RDECU256 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking RDECU256 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking RDECU256 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking RDECU256 you will learn all the available features of the product, as well as information on its operation. The information that you get Viking RDECU256 will certainly help you make a decision on the purchase.
If you already are a holder of Viking RDECU256, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking RDECU256.
However, one of the most important roles played by the user manual is to help in solving problems with Viking RDECU256. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking RDECU256 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
