Instruction/ maintenance manual of the product LPKPDR Viking
Go to page of 10
F20525E EN (041414) Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-845-4641 Installation Guide LPKPDR - Universal LP Conversion .
Table of Contents IMPORTANT– Please Read and Follow! 2 3 Fire/explosion hazard. IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, A FIRE OR EXPLOSION MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY, OR DEATH. • DO NOT store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance.
4 LP Orifice Conversion Kit Contents Excludes models VGR, VCM, VRT, VRT-R and D3 models. For information on these models, please contact customer service at 1-888-845-4641. 5 Regulator Conversion Flip Cap Hex Nut Cap Before proceeding with conversion, turn off gas supply and disconnect power to unit.
7 6 Infrared Broiler Conversion IMPORTANT: The infrared broiler orifice must be changed from rear of range before unit is installed. Locate bag labeled IR Broiler Orifice. Remove nut securing 90 degree fitting and broiler tubing to rear of range. Remove Orifice from 90 degree fitting and replace with orifice from bag labeled IR Broiler Orifice.
8 Locate bag labeled Sealed Burner Orifice Type 2. NOTE: If the burner is a PowerPlus™ Burner (check control panel), use orifice kit 011915-000 to convert this burner only. Remove the screws (Item #1) and set burner base aside (Item #2). IMPORTANT: Burner bases must be handled carefully to prevent igniter wires from becoming disconnected.
11 10 Orifice Locations (#61) (#63) (#61) (#67) (#57) (#65) (#65) (#57) (#67) DGRT301 DGRT361 (#60) (#67) (#58) (#70) DCCG130 DSCD130 Open Burner Type 3 Surface Burner Conversion Locate bag labeled Open Burner Orifice Type 3. Remove screws securing open surface burner to burner box and remove open surface burner.
13 12 Griddle Conversion (for models equipped with griddle) U-Shape Burner with Spark Ignition Locate bag labeled Griddle Orifice. Remove screws securing griddle venturi plate to griddle box and remove griddle venturi plate. Remove screws securing griddle burner to burner box.
15 14 Straight Tube Burner with Glow Bar Ignition Remove screws securing glow bar igniter to burner box and place glow bar igniter aside. Remove screws securing metal plate to burner box located underneath griddle burner and remove metal plate. Remove screws securing griddle burner to unit and remove griddle burner.
17 16 Wok Conversion (for models equipped with wok) Remove center trivet and/or grates, center ring and grate support. Lift and remove burner from unit. Loosen air shutter screw and adjust opening on burner to 5/8” and tighten air shutter screw. Remove orifice by turning counterclockwise and replace with orifice from bag labeled Wok Orifice.
19 18 Bake Conversion “U” Shaped Remove oven racks and rack supports. Remove oven bottom. Remove screws securing bake igniter to bake burner. Remove screws securing bake burner shield to oven burner box. Remove screws securing bake burner to oven burner box.
An important point after buying a device Viking LPKPDR (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking LPKPDR yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking LPKPDR - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking LPKPDR you will learn all the available features of the product, as well as information on its operation. The information that you get Viking LPKPDR will certainly help you make a decision on the purchase.
If you already are a holder of Viking LPKPDR, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking LPKPDR.
However, one of the most important roles played by the user manual is to help in solving problems with Viking LPKPDR. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking LPKPDR along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
