Instruction/ maintenance manual of the product F21287A EN Viking
Go to page of 20
Viking Range, LLC 111 Front Street Greenwood, Mississippi 38930 USA (662) 455-1200 For product information, call 1-888-(845-4641) or visit the Viking Web site at vikingrange.
3 NOTE: If installing hood with warming shelf panel, install warming shelf panel first. IMPORTANT – PLEASE READ AND FOLLOW • Before beginning, please read these instructions completely and carefully. • Do not remove permanently affixed labels, warnings, or plates from the product.
5 4 21” (53.3 cm) A 10” (25.4 cm) 12 ” (30.5 cm) A (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 5” (12.7 cm) 21” (53.3 cm) A 12 ” (30.5 cm) A (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 5” (12.
6 7 * NOTE: When installing with a 24” high-shelf, the 27” (68.6 cm) max. dimensions must be used. 24”min. (61.0 cm) to 27”max.* (68.6 cm) 60”min. (152.4 cm) to 63”max. (160.0 cm) 36” (91.4 cm) A B C D 18” (4.6 cm) 3-7/8” (9.8 cm) 3-4” (1.
9 8 24” (61.0 cm) A 18” (45.7 cm) 12” (30.5 cm) 6” (15.2 cm) A (Hood width) 30”W . 29-7/8“ (76.2 cm) 36”W . 35-7/8” (91.1 cm) 42”W . 41-7/8” (106.
11 10 10” (25.4 cm) dia. duct location B A 30”W . 14-15/16” (37.9 cm) 36”W . 17-15/16” (45.6 cm) 42”W . 20-15/16” (53.2 cm) 48”W . 23-15/16” (60.8 cm) 60”W . 29-15/16” (76.0 cm) A 5-1/2” (14.0 cm) B 30”W . 29-7/8” (75.9 cm) 36”W .
13 12 27” (68.6 cm) A 18” (45.7 cm) 12” (30.5 cm) 6” (15.2 cm) A (Hood width) 36”W . 35-7/8” (91.1 cm) 48“W . 47-7/8” (121.6 cm) 60”W .
15 14 24” (61.0 cm) B A 18” (45.7 cm) 12” (30.5 cm) to 24” (61.0 cm) 6” (15.2 cm) A (Duct width) 30”W . 12“ (30.5 cm) 36”W . 12“ (30.5 cm) 42”W . 12“ (30.5 cm) 48“W . 18“ (45.7 cm) 60”W . 24“ (61.0 cm) 66”W . 24“ (61.
16 17 A 48”W . 23-15/16” (60.8 cm) 60”W . 29-15/16” (76.0 cm) 66”W . 32-15/16” (83.7 cm) C 48”W . 18” (45.7 cm) 60”W . 24” (61.0 cm) 66”W . 24” (61.0 cm) 10” (25.4 cm) dia. duct location 6” (15.2 cm) 1-1/2” (3.8 cm) 1-1/2” (3.
19 18 * A 1,200 CFM interior- or exterior-power ventilator should be used when installed over range/rangetop with gas char-grill. Max duct run is 50 ft (15.2 m). ** It is recommended that the 1,500 CFM ventilator be used with longer duct runs. Max duct run is 75 ft (22.
21 20 A 54”W . 26-15/16” (68.4 cm) 66”W . 32-15/16” (83.7 cm) C 54”W . 18” (45.7 cm) 66”W . 24” (61.0 cm) 1-1/8” (2.9 cm) 1-1/8” (2.9 cm) 10” (25.4 cm) dia. duct location B A C 6” (15.2 cm) 120 V power supply B 54”W . 53-7/8” (136.
23 22 (VBCV Wall Custom Ventilator System 36”, 42”, 48”, & 60”) 21-7/16” (54.5 cm) A* *For best results, center the unit over the burners of the cooking product (front to back; right to left). Wall Hoods Description A (Hood Width) 36” W.
25 1-1/2” (3.81 cm) 1” (2.54 cm) 21-5/16” (54.1 cm) 21-7/8” (55.8 cm) 6” (15.2 cm) 4 1 o 17-1/4” (43.8 cm) 7/8” (2.2 cm) 1-1/2” (3.8 cm) 17-1/4” (43.8 cm) 11-1/2” (29.2 cm) 21-5/16” (54.1 cm) 6” (15.2 cm) 21-7/8” (55.8 cm) 4 1 o 9/16” (1.
27 26 9/16” (1.4 cm) D C 10” (25.4 cm) dia. duct location 5-1/2” (14.0 cm) 1200 or 1500 CFM Exterior or In-Line Ventilator Installation 48”, 60” W. Models 9/16” (1.4 cm) C 10” (25.4 cm) dia. duct location 5-1/2” (14.0 cm) D 1200 CFM Interior Ventilator Installation 36”, 42”, 48”, 60” W.
29 CAUTION: If not using a duct cover, using screws provided, make sure top mounting screws are secured into soffit or cabinet framing. Use additional mounting screws, if necessary. Connect black to black, white to white, and the green/bare wire under the green screw.
31 CAUTION: Secure vent hood. Make sure mounting screws are secured into framing. Use additional mounting screws and wall anchors, if necessary. 7 5/16” n ut drive r 5 Remove electrical box cover. 1 6 2 Flip hood over. Insert 6” of electrical wiring through the top of vent hood and secure.
33 1-13/1 6 ” (4.6 cm ) 1-1/2”x 3/4” (3.8 cm) x (1.9 cm) wood strip 1 5/16” nut driver Slot for wood strip 2 5/16” nut driver Measure down 1-13/16 (4.6 cm) from desired height of hood and secure 1-1/2” x 3/4” wood strip (provided locally) to wall using screws provided.
35 3 4 2 Place duct cover top inside duct cover base and lower until desired height is found. Mark height. Use the retaining nuts and bolts to fasten in place and remove tape. Slide the duct cover in place and fasten from inside canopy using the sheet metal screws provided.
37 4 5/16” nut driver Attach canopy to duct cover/soffit. Seal top of hood to duct with aluminum tape. 3 T o install ventillation kit refer to ventillation kit installation instructions. Run duct work down to bottom edge of duct cover/soffit and secure in place.
38 39 If service is required, call your dealer or authorized service agency. The name of the authorized service agency can be obtained from the dealer or distributor in your area.
An important point after buying a device Viking F21287A EN (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Viking F21287A EN yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Viking F21287A EN - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Viking F21287A EN you will learn all the available features of the product, as well as information on its operation. The information that you get Viking F21287A EN will certainly help you make a decision on the purchase.
If you already are a holder of Viking F21287A EN, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Viking F21287A EN.
However, one of the most important roles played by the user manual is to help in solving problems with Viking F21287A EN. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Viking F21287A EN along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
