Instruction/ maintenance manual of the product VZ-17RTA ViewZ
Go to page of 28
17/19-INCH VALUE TFT -LCD MONITOR INSTRUCT ION MANUA L Please read this manual thoroughly before use, a nd keep it handy for future re ference..
.
SAFETY INSTRUCTION ………………………………………………………………… .. 2 ~ 3 CAUTIONS ……………………………………………………………… .......................... 4 FCC RF INTERFERENCE STATEMENT …………………………… .
Important Safet y Instruction 1. Read these instru ctions. 2. Keep these Instru ctions. 3. Heed all w arnings. 4. Follow al l instructions. 5. Do not use this appa ratus near w ater . 6. Clean only with dry cloth. 7. Do not block any ventilation open ings.
- The apparatus sha ll not be expo sed to drippi ng or splashing and tha t no objects filled with liquids, such as vases, shall be place d no the apparatus .
CAUTION The power supply cord is used as the main disconnect device, ensure that the socket-outlet is located/installed near the equipment and is easily accessible.
NOTE This e quipment has been tested and f ound to comp ly with the limits for a Class A digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to prov ide reasonable protection against harmful interference in a residential installation.
A. BOTTOM P A NEL CONTROL 1. DC 12V IN 2. D-SUB IN PC Signal Input 3. VIDEO 1(AV1) IN Composite signal Input for AV1 4. VIDEO 1(AV1) OUT Video looping output for AV1 5. VIDEO 2(AV2) IN Composite signal Input for AV2 6. VIDEO 2(AV2) OUT Video looping output for AV2 7, 8.
B. REMOTE CONT ROLLER (Option) 1. POWER( ) Turns the power ON or OFF. There will be a few seconds delay before the display appears. 2. SOURCE Select pc or video( AV1 / AV2 / PC ) sources. 3. APC (Auto Picture Control) Select picture mode. 4. ACC (Auto Colour Control) Select Colour mode.
C. FRONT KEY C ONTROL 1. SOURCE / Select input source, and move the previous menu. 2. MENU Activates and exits the On Screen Display . This button can also be used to move previous menu or status. 3, 4. AUTO/ ▼, ▲ Th ese buttons allow user to move the sub -menu of the activated function.
OSD MENU DESCRIP TION A: PICTUR E MENU (for AV1 & AV2 i nput ) 1) Press the MENU button. 2) Press the up (▲) or dow n(▼) button to select the PICTURE . 3 ) Press the up(▲) or down(▼) button to select the PICTURE sub menu. 4 ) Press the left( ◀ ) or right( ▶ ) button to adjust the sub menu sett ing .
B. SOUND MENU 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the SOUND . 1. VOLUME 1) Press the right( ▶ ) or enter button 2) Press the up(▲) or down(▼) button to select the Volu me. 3) Press the left( ◀ ) or right( ▶ ) button to adjust the Volume.
2 . Mute 1) Press the up(▲) or down(▼) button to select the MUTE. 2) Press the left( ◀ ) or right( ▶ ) button to select the ON or OFF. INSTRUCTION MANUAL ………………… ………………………………………………….
C. PC MENU(for P C input) 1) Press the MENU button. 2) Press the up(▲) or down(▼) button to select the PC. 1. CONTRAST & BRIGHTNESS 1) Press the up(▲) or down(▼) button to select the C ONTRAST and BRIGHTNESS. 2) Press the left( ◀ ) or right( ▶ ) button to adjust the CONTRAST and BRIGHTNESS Setting.
2. H. POSITION, V. POSITION, CLOCK & PHASE 1) Press the up(▲) or down(▼) button to select the PC sub Menu. 2) Press the left( ◀ ) or right( ▶ ) button to adjust the PC image setting. • H. POSITION : Move image horizontally on screen right or left.
3. COLOR MODE 1) Press the up(▲) or down(▼) button to select the COLOR MODE . 2) Press the right( ▶ ) or enter button. 3-1. AUTO COLOR 1) Press the up(▲) or down(▼) button to select the AUTO COLOR. 2) Press the right( ▶ ) or enter button. • AUTO COLOR : Auto color geometry adjustment.
3-2. COLOR TEMP 1) Press the up(▲) or down(▼) button to select the COLOR TEMP. 2) Press left( ◀ ) or right( ▶ ) button to select the color temp mode. 3-3 COLOR TEMP - USER 1) Press lef t( ◀ ) or right( ▶ ) button to select the USER in the COLOR TEMP.
D . SETUP MENU 1) Press the up(▲) or down(▼) button to select the SETUP. 2) Press the right( ▶ ) or enter button. 1. LANGUAGE 1) Press the left( ◀ ) or right( ▶ ) button to select the OSD language. 16 …………………………………………………………………….
2 . H. POSITION, V. POSITION, OSD TIMER, TRA NSP ARENT(for OSD control) 1) Press the up(▲) or down(▼) button to select the SETUP sub menu. 2) Press the left( ◀ ) or right( ▶ ) button to adjust the OSD Setting. • H. PO SITIO N : Move OSD horizontally on screen right or left.
Using the VESA standard wall mount design and the 100mm hole pattern on the back pan el to install the LCD monitor to the wall. Wall-mount Installati on (Option) 1.
▶ PIN A S SIGNMENTS Pin 1 RED VIDEO 9 2 GREEN VIDEO 10 SIGNAL CABLE DETECT 3 BLUE VIDEO 11 GROUND 4 GROUND 12 SDA(for DDC) 5 GROUND 13 H-SYNC.(or H+V SYNC.) 6 RED GROUND 14 V-SYNC. 7 GREEN GROUND 15 SCL(for DDC) 8 BLUE GROUND ▶ A CCESSORIES 1. Power cord 2 .
This monitor features a power management sy stem to “power down” upon receipt of the VESA DPMS(The display power management signaling) from a VESA DPMS video card. The VESA DPMS-compliant video card performs this signaling system through not sending horizontal, vertical, or sync sig nal.
17 ’’ 1 9’’ LCD-Type 17 ˝ Diagonal AM-T FT(Active- Matrix) 19 ˝ Diagonal AM- TFT(Active -Matrix) Pixel pitch(mm ) : 0.264(H) x 0.2 64(V) Pixel pitch(mm ) : 0.
WEEE S ymbols 22 ……………………………………………………………………. INSTRUCTION MANUAL Correct Disposal of T his Product (Waste Electrical & Electronic Equipment) (App.
MEMO.
MEMO.
MEMO.
P/N : L39ME01 68 Rev.6.
An important point after buying a device ViewZ VZ-17RTA (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought ViewZ VZ-17RTA yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data ViewZ VZ-17RTA - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, ViewZ VZ-17RTA you will learn all the available features of the product, as well as information on its operation. The information that you get ViewZ VZ-17RTA will certainly help you make a decision on the purchase.
If you already are a holder of ViewZ VZ-17RTA, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime ViewZ VZ-17RTA.
However, one of the most important roles played by the user manual is to help in solving problems with ViewZ VZ-17RTA. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device ViewZ VZ-17RTA along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
