Instruction/ maintenance manual of the product TDA 735 Beko
Go to page of 11
TDA 735 15.7 cu.ft. Fridge / Freezer Printed in Turkey Part no: 48 2727 00 05 BEKO plc Beko House Caxton W ay W atford Hertfordshire WD18 8UF T el: 0845 600491 1 Fax: 0845 6004922 e-mail: service@beko.
1 CONTENTS P AGE SAFETY FIRST / ELECTRICAL REQUIREMENTS TRANSPORT A TION INSTRUCTIONS INST ALLA TION INSTRUCTIONS GETTING TO KNOW YOUR BEKO FRIDGE / FREEZER REVERSING THE DOORS SUGGESTED ARRANGEMENT O.
ELECTRICAL REQUIREMENTS Before you insert the plug into the wall socket make sure that the voltage and the frequency shown in the rating plate inside the appliance corresponds to your electricity supply . Rating label is on the left hand side of the fridge inner liner .
6 GETTING TO KNOW YOUR BEKO FRIDGE / FREEZER IMPORT ANT INST ALLA TION INSTRUCTIONS 1. The space in the room where the appliance is installed must not be smaller than 10 cubic metres.
7 8 REVERSING THE DOORS W e recommend that you reverse doors before switching on for the first time. T ools required: Small and medium size flat and cross-headed screwdrivers, a pair of pliers.
SUGGESTED ARRANGEMENT OF FOOD IN THE FRIDGE/FREEZER Arrangement Examples (See diagram) 1. Frozen food, rapid cooling of beverages, making ice cubes, freezing food. 2. Baked, chilled cooked food, dairy products. 3. Beverages, dairy products, cans. 4. Meat, sausages, cold cuts.
STORING FROZEN FOOD Y our freezer is suitable for the long-term storage of commercially frozen foods and also can be used to freeze and store fresh food. If there is a power failure do not open the door . Frozen food should not be affected if the failure lasts for less than 23 hrs.
DEFROSTING A) FRIDGE COMP ARTMENT The fridge compartment defrosts automatically . The defrosting water runs to the drain tube via a collection container at the back of the appliance (1). (see diagram) During defrosting water droplets may form at the back of the fridge compartment where concealed evaporator is located.
REPLACING THE INTERIOR LIGHT BULB (See diagram) Should the light fail to work switch off at the socket outlet and pull out the mains plug. Use a cross headed screw driver to remove the light diffuser cover . Then ensure the bulb is screwed in until it is secure in the bulb holder .
18 ENERGY SA VING TIPS 1- Ensure your appliance is installed in a well ventilated area. If the ambient temperature is low (but in no case lower than 5 degrees C), then the energy saving will be more.
19 HOW TO OBT AIN SERVICE Please keep your purchase receipt or other proof of purchase in a safe place; you will need to have it should the product require attention under guarantee. Y ou should also complete the details below; it will help us assist you when requesting ser vice.
An important point after buying a device Beko TDA 735 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Beko TDA 735 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Beko TDA 735 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Beko TDA 735 you will learn all the available features of the product, as well as information on its operation. The information that you get Beko TDA 735 will certainly help you make a decision on the purchase.
If you already are a holder of Beko TDA 735, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Beko TDA 735.
However, one of the most important roles played by the user manual is to help in solving problems with Beko TDA 735. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Beko TDA 735 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
