Instruction/ maintenance manual of the product 100 Vidikron
Go to page of 29
LIGHT AMP™ DLP™ PROJECTOR V ersion 1.1.
1 T ABLE OF CONTENTS Introduction ......................................................................................................................... 2 W arnings & Safety Precautions ..........................................................
2 INTRODUCTION » Introduction to the Vidikr on V ision Model 100 LIGHT AMP™ DLP™ Projector V idikron’ s new flagship V ision™ Model 100 has been specifically engineered to produce high performance video in the kinds of environments most people use to enjoy their entertainment - family rooms, great rooms and living rooms.
W ARNINGS & SAFETY PRECA UTIONS 3 W ARNING FCC Regulations state that any unauthorized changes or modications to this equipment not expressly approved by the manufacturer could void the user ’ s authority to operate this equipment. CAUTION: TO PREVENT FIRE OR SHOCK HAZARDS, DO NOT REMOVE COVER.
4 W ARNINGS & SAFETY PRECAUTIONS DECLARA TION OF CONFORMITY VIDIKRON PROJECTOR, MODEL 100 This device complies with Part 15 of the FCC rules. Operation is subject to the following conditions: (1) .
5 LIMITED W ARRANTY TWO YEAR LIMITED W ARRANTY For Projectors, V ideo Processors and Controllers Congratulations on your purchase of a V idikron video product and welcome to the V idikron family! W ith proper installation, setup and care, you should enjoy many years of unparalleled video performance.
LIMITED W ARRANTY 6 This Limited W arranty begins on the effective date of delivery to the end user . For your convenience, keep the original bill of sale as evidence of the purchase date.
1. DVI 1 (Digital) DVI input #1, HDCP compliant. DVI 2 (Digital) DVI input #2, HDCP compliant. 2. COMPONENT VIDEO (RCA connectors) Standard Denition (480i/576i) Component (YPrPb) input.
8 7. IR W ired input from an external remote control. 8. RS-232 CONTROL Connection for an external RS-232 controller device to place the Projector under system automation control. 9. V ACUUM FLORESCENT DISPLA Y Reads out all relevant status information of the Projector at all times.
REMOTE CONTROL DESCRIPTION 9 .
10 REMOTE CONTROL DESCRIPTION MEMOR Y SETTINGS BUTTONS Four video preset memory setting buttons are available: 8. ISF NT – ISF Night 9. ISF DA Y – ISF Day 10.
1 1 QUICK CONNECTION AND SETUP GUIDE While there are many different ways to connect your source equipment to your V idikron Projector , the examples below are the most common. ANALOG INPUTS: • Composite V ideo Input Composite video is the most common type of signal used, but is also the lowest in picture quality .
12 QUICK CONNECTION AND SETUP GUIDE Step I Connection: 1. Connect Power to the Projector . 2. Connect V ideo (Composite), S-V ideo to 1 or 2, Component 480i (RCA) input, HD signals to HD1 or HD2 (BNC), DVI 3. T urn ON the system from the projector control panel and main power switch.
13 HOW TO INST ALL OR REMOVE THE PROJECTOR LAMP IMPOR T ANT NOTE: LAMP INST ALLA TION OR REMOV AL SHOULD ONL Y BE PERFORMED BY AN AUTHORIZED VIDIKRON SYSTEM INST ALLER OR TECHNICIAN. Step One: INSURE PROJECTOR AC POWER IS OFF AND POWER CORD IS REMOVED PRIOR TO INST ALLING OR REMVOING THE LAMP ASSEMBL Y .
14 Lamp Assembly Handle Next, grasp the lamp assembly handle and pull gently , removing the lamp module out of the projector housing. HOW TO INST ALL OR REMOVE THE PROJECTOR LAMP Step Four: Replace lamp module and replace, retighten all screws.
15 LENS SHIFT RANGE Lens Option 1: Thr ow Distance 1.2 - 1.4 x Width of Scr een Example: 56” x 100” Screen TD = 120” to 140” lens to screen When only V ertical or only Horizontal Shift is used: Maximum. V ertical Shift ↑ = 60% of screen height (.
16 LENS SHIFT RANGE Lens Option 4: Thr ow Distance 2.35 - 3.60 x Width of Scr een Example: 56” x 100” Screen TD = 235” to 360” lens to screen When only V ertical or only Horizontal Shift is used: Maximum. V ertical Shift ↑ = 60% of screen height (.
LENS SHIFT RANGE .
MENU DESCRIPTION AND NA VIGA TION 18 When the MENU button is pressed on either the remote control or the rear panel, the main menu will appear on-screen. An example of the main menu is shown to the right. The UP and DOWN buttons on the rear panel, and IR Remote Control will move the selected item on the menu.
19 MENU DESCRIPTION AND NA VIGA TION Aspect Ratio provides selection of one of ve aspect ratios: Anamorphic, Standard 4:3, Letterbox, IntelliWide and Cinema. T o select an aspect ratio via the main menu, press either the up and down buttons on the remote or rear panel, highlight ASPECT RA TIO and press ENTER.
MENU DESCRIPTION AND NA VIGA TION 20 While each of the picture quality adjustments can be set to suit the needs of the user, there is a ‘proper ’ way to set the adjustments. For setting TINT and COLOR, please refer to the color bar test pattern below .
21 MENU DESCRIPTION AND NA VIGA TION » Input Position Indicates selection has been made for the Input Position selection menu. These settings are stored separately for each input and each resolution for that input. • Press ENTER to shift the Image Position Left/Right with the LEFT and RIGHT arrows.
BASIC TROUBLESHOOTING TIPS The following is a basic troubleshooting guide that can assist you in resolving typical problems may result in normal operation. If you have encountered problems that are not listed in this guide, please contact your V idikron dealer for assistance.
Baud rate: 19200 (xed) Bits: 8 No Parity All protocol in ASCII format RS-232 input connector pin numbers: TxD= Pin# 2, RxD= Pin# 3, GnD= Pin# 5 Command format (single command): command value (i.e. brightness 100). NOTE: A space (not an underscore) or comma may be used between the command and its value.
Command Parameter V alue Stored? Description (min/max) POWER 0/1 NA T urns Projector On and Off ON NA NA T urns Projector On OFF NA NA T urns Projector Off COMPOSITE NA YES Selects the Composite video.
Command Parameter V alue Stored? Description (min/max) IHPOS? NA NA Returns input horizontal position value IHEIGHT? NA NA Returns input vertical height value OHPOS? NA NA Returns output horizontal po.
DIMENSIONS 26 .
SPECIFICA TIONS 27 V ision Model 100 Projector: Projector T ype: Digital Light Processing™ (DLP™), 3-chip, 16:9 HD-2+, DMD™ Native Resolution: 1280 x 720 (16:9) Aspect Ratios: 4:3, Letterbox, 16.
R UMA-011085 1-18-05 v1.1 V idikron 2900 Faber Street Union City , CA 94587 Ph (510) 324-5900 / Fax (510) 324-5905 1-888-4-VIDIKR ON.
An important point after buying a device Vidikron 100 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vidikron 100 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vidikron 100 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vidikron 100 you will learn all the available features of the product, as well as information on its operation. The information that you get Vidikron 100 will certainly help you make a decision on the purchase.
If you already are a holder of Vidikron 100, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vidikron 100.
However, one of the most important roles played by the user manual is to help in solving problems with Vidikron 100. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vidikron 100 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
