Instruction/ maintenance manual of the product VEFSEE 244 P.. Verona
Go to page of 16
IMPORT ANT - PLEASE READ AND FOLLOW ✓ Before beginning, please read these instructions completely and carefully . ✓ Do not remove permanently af fixed labels, warnings, or plates from the product. This may void the warranty . ✓ Please observe all local and national codes and or dinances.
2 WARNING • ALL RANGES CAN TIP • INJURY TO PERSON COULD RESULT • INSTALL ANTI-TIP DEVICE PACKED WITH RANGE • SEE INSTALLATION INSTRUCTIONS This appliance is designed and manufactured solely fo.
3 W ARNING! THIS APPLIANCE HAS TO BE INST ALLED BY A QUALIFIED INST ALLER. Installation must conform with local codes. Improper installation, adjustment, alteration, services, or maintenance can cause injury or property damage. Consult a qualified installer or a service agent.
4 W ARNING!! ELECTRICAL GROUNDING INSTRUCTIONS The ran ge must b e electr ically ground ed in acc ordance with local codes or , in the absence of local codes, with the National Electrical Code, ANSI/NFP A No. 70-latest edition. Installation should be made by a Iicensed electrician.
5 installation PROXIMITY TO SIDE CABINETS 1. This range may be installed directly adjacent to existing 36" (914 mm) high base cabinets. Range dimensions: • width: 23” 7/8 (606.5 mm) • depth: 24” 11/64 (614.1 mm) • height (without backguard): MIN 35” 17/32 (902.
6 A A B (914 mm) 36" 30" min. (762 mm) (457 mm) 18" min. 0" 0" (0 mm) (0 mm) 20" min. (500 mm) 3" min. (76 mm) 13" max. (330 mm) 0" (0 mm) 3" min. (76 mm) 13" max. (330 mm) (914 mm) 36" 0" (0 mm) 20" min.
7 LEVELLING THE RANGE The range is equipped with 4 LEVELLING FEET (supplied in a separate kit) and may be levelled by screwing or unscrewing the feet (fig. 1.8). It is important to observe the directions of figures 1.6, 1.7a, 1.7b . + 5/16" + 8 mm + 5/16" + 8 mm 0 mm 0" + 11/16" + 17.
8 electrical connection ELECTRICAL REQUIREMENTS • This appliance must be properly installed and grounded by a qualified technician in accordance with the National Electrical Code ANSI/NFP A No.70 (latest edition) and local electrical code requirements.
9 3-Wir e Flat Power Cord Installation (See Figur es 2.1 and 2.2) 1. Remove the T erminal Block Access Plate on the back of the range by unscrewing the 4 fixing Screws . 2. Insert the Flat Power Cord thr ough the Bracket ; then tighten the Flat Power Cord by using the Strain Relief .
10 3-Wir e Power Cord Installation (See Figur es 2.1, 2.3, 2.4 and 2.5) 1. Remove the T erminal Block Access Plate on the back of the range by unscrewing the 4 fixing Screws (fig. 2.1). 2. Remove the Bracket and Strain Relief group by unscrewing the Bracket Fixing Screws (fig.
11 4-Wir e Conduit Installation (See Figur es 2.1, 2.7, 2.8 and 2.10) 1. Remove the T erminal Block Access Plate on the back of the range by unscrewing the 4 fixing Screws (fig. 2.1). 2. Remove the Bracket and Strain Relief group by unscrewing the Bracket Fixing Screws (fig.
12 WIRING DIAGRAM RELAY SWITCH E61 S1 P2 PILOT S2 2 4 P1 S1 P2 S2 2 4 4a P1 S1 P2 PILOT S2 2 4 P1 2 4 4a H S 2 4 2 4 S1 P2 PILOT S2 2 4 P1 H S 2 4 H S H S 1200W 240V 1200W 240V 1700W 240V 2100W 24.
13.
14.
15.
Cod. 1103638 - ß2 The manufacturer cannot be held re spon sible for possible inaccuracies due to printing or transcription errors in the present booklet.
An important point after buying a device Verona VEFSEE 244 P.. (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Verona VEFSEE 244 P.. yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Verona VEFSEE 244 P.. - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Verona VEFSEE 244 P.. you will learn all the available features of the product, as well as information on its operation. The information that you get Verona VEFSEE 244 P.. will certainly help you make a decision on the purchase.
If you already are a holder of Verona VEFSEE 244 P.., but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Verona VEFSEE 244 P...
However, one of the most important roles played by the user manual is to help in solving problems with Verona VEFSEE 244 P... Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Verona VEFSEE 244 P.. along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
