Instruction/ maintenance manual of the product CTG212FD Verona
Go to page of 20
✓ Do not store or use gasoline or other flammable vapors and liquids in the vicinity of this or any other appliance. ✓ WHA T TO DO IF YOU SMELL GAS: • Do not try to light any appliance. • Do not touch any electrical switch; do not use any phone in your building.
2 Dear Customer , Thank you for having pur chased and given your prefer ence to our pr oduct. The safety pr ecautions and recommendations r eported below ar e for your own safety and that of others. They will also pr ovide a means by which to make full use of the featur es offered by your appliance.
3 IMPORT ANT PRECAUTIONS AND RECOMMENDA TIONS ✓ After having unpacked the appliance, check to ensure that it is not damaged. If you have any doubts, do not use it and consult your supplier or a professionally qualified technician. ✓ Packing elements (i.
4 COOKING POINTS 1. Semirapid burner (SR) - 6,000 BTU/hr 2. Rapid burner (R) - 10,000 BTU/hr CONTROL P ANEL DESCRIPTION 3. Rapid burner (R) control knob (2) 4. S emirapid burner (SR) control knob (1) Note: - The electric gas-lighting device is incorporated into the knobs.
5 Fig. 2.3 Fig. 2.2 Fig. 2.1 using the gas cooktop CHOICE OF BURNER (fig. 2.3) The symbols printed on the panel beside the gas knobs indicate the correspondence between the knob and the burner . The most suitable burner is to be chosen according to the diameter and volume capac- ity of the container to be warmed.
6 Do not use steam jet cleaners because the humidity could infiltrate into the appliance making it dangerous. GENERAL RECOMANDA TION ✓ Before you begin cleaning you must ensur e that the hob is switched off. It is advisable to clean when the appliance is cold.
7 BURNERS AND GRIDS ✓ These parts can be removed and cleaned with appr opriate products. ✓ After cleaning, the burners and their flame distributors must be well dried and correctly r eplaced.
8 W ARNING! THIS APPLIANCE HAS TO BE INST ALLED BY A QUALIFIED INST ALLER. Improper installation, adjustment, alteration, services, or maintenance can cause injury or pr operty damage. Consult a qualified installer , service agent, or the gas supplier .
9 GENERAL INFORMA TION 1. Installation must conform with local codes or , in the absence of local codes, with the National Fuel Gas Code , ANSI Z223.1-Latest Edition.
10 min 11 ” 13/32 (290 mm) 30 ” (762 mm) 18 ” (457 mm) min 4 ” (102 mm) from cut-out max 13 ” (330 mm) min 11 ” 13/32 (290 mm) 30 ” (762 mm) 18 ” (457 mm) min 4 ” (102 mm) from cut-out max 13 ” (330 mm) Fig.
11 Fig. 4.3 A A A A 20 mm min. 40 mm max. B C A Fig. 4.4 F ASTENING THE COOKTOP (fig. 4.3 - 4.4) Each cooktop is supplied with a set of tabs and screws to fasten it on units with a working surface from 2 to 4 cm deep. The kit includes 4 tabs “ A ” and 4 self-threading scr ews “ B ” .
12 Gas supply line Shutoff valve “ open ” position To cooktop Fig. 5.1 All gas connections must be made according to national and local codes. This gas supply (service) line must be the same size or greater than the inlet line of the appliance. Sealant on all pipe joints must be resistant to te action of LP/Pr opane gas.
13 PRESSURE REGULA TOR INST ALLA TION To cooktop UNLOCK LOCK LOCK T o cooktop LOCK Arrow STEP 1 The elbow connection can be turned in the direction requir ed after the manifold female pipe fitting has been slackened by using a wrench.
14 To mains connection To cooktop Manifold test point pressure 1/8 ” NPT 1/2 ” G cylindrical (ISO 228-1) male Cooktop manifold Manifold female pipe fitting Elbow connection Connector Pressure .
15 b) Any conversion requir ed must be performed by your dealer or a qualified licensed plumber or gas service company . Please provide the service person with this manual before work is started on the cooktop. (Gas conversions ar e the responsibility of the dealer or end user .
16 1 2 NATURAL GAS REGULATION LP/PROPANE REGULATION A SETTING THE PRESSURE REGULA TOR (fig. 5.5) 1. Unscrew the r egulator cover; 2. Unscrew the A component, r everse and screw it according to the LP/PROP ANE regulation. CONVERSION TO LP/PROP ANE GAS Every cooktop is provided with a set of injectors for the various types of gas.
17 REGULA TING THE BURNER MINIMUM SETTING When switching from one type of gas to another , the minimum flow rate must also be correct: the flame should not go out even when passing suddenly fr om maximum to minimum flame.
18 electrical connection W ARNING Electrical Shock Hazard Plug into a grounded 3-prong outlet. Do not remove ground prong. Do not use an adapter. Failure to follow these instructions can result in death, fire, or electrical shock.
19 Wiring diagram key A Ignition coil PA Ignition switches group M T erminal block CA Igniter Fig. 6.2 NL PA A CA M CA WIRING DIAGRAM .
Cod. 1102742 ß 2 The manufacturer cannot be held responsible for possible inaccuracies due to printing or transcription err ors in the present booklet.
An important point after buying a device Verona CTG212FD (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Verona CTG212FD yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Verona CTG212FD - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Verona CTG212FD you will learn all the available features of the product, as well as information on its operation. The information that you get Verona CTG212FD will certainly help you make a decision on the purchase.
If you already are a holder of Verona CTG212FD, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Verona CTG212FD.
However, one of the most important roles played by the user manual is to help in solving problems with Verona CTG212FD. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Verona CTG212FD along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
