Instruction/ maintenance manual of the product DEF33CE Vermont Castings
Go to page of 12
- 1 - INSTALLER: DO NOT DISCARD THIS MANUAL - LEAVE FOR HOMEOWNER 10003014 11/00 Rev. 0 Electric Fireplace Model DEF33CE WARNING! IF THE INFORMATION IN THIS MANUAL IS NOT FOLLOWED EXACTLY, AN ELECTRICAL SHOCK OR FIRE MAY RESULT CAUSING PROPERTY DAMAGE, PERSONAL INJURY OR LOSS OF LIFE.
- 2 - T ABLE OF CONTENTS Please read the Installation & Operating Instructions before using this appliance. Thank you and congratulations on your purchase of a Majestic fireplace. IMPORTANT: Read all instructions and warnings carefully before starting installation.
- 3 - LOCATING YOUR MAJESTIC ELECTRIC FIREPLACE INST ALLA TION INSTRUCTIONS 16. This appliance has hot and arcing or sparking parts inside. Do not use it in areas where gasoline, paint or flammable liquids are used or stored.
- 4 - FIREPLACE DIMENSIONS A 33" 838mm B 28 7/8" 733mm C 16 3/8" 416mm D 31" 787mm E 17" 430mm F 11 1/2" 292mm G 3" 76mm M 36" 914mm N 51" 1295mm O 25 1/2" 648mm ROD 12" 305mm ROW 33 1/2" 851mm ROH 29 5/8" 752mm Fig.
- 5 - 1. Choose fireplace location. 2. Place fireplace into position. 3. Frame in fireplace with a header across the top. It is important to allow for finished face when setting the depth of the frame. FRAMING AND FINISHING MANTELS Depending on the width of the mantel it may be installed higher or lower from the top of the louvre opening.
- 6 - INSTALLATION OF LOGS 1. Turn off power to the unit. 2. Remove front glass (See "Glass Removal" section). 3. Remove logs from packaging. 4. The ember bed is shipped in place. No adjustment is necessary. 5. Install rear left log (A15). Use notches to have a proper location.
- 7 - LOUVRE REMOVAL GLASS FRAME REMOVAL 1. Turn off electrical supply to unit. 2. Let fireplace cool if it has been operating. 3. Remove top louvre. (See Louvre Removal). 4. Open lower louvre assembly. 5. Remove two door retention screws along lower edge of door frame.
- 8 - MAINTENANCE OF MOTORS The motors used on the fan and the drum assembly are prelubricated for extended bearing life and require no further lubrication. However, periodic cleaning/vacuuming of the fan/heater is recommended. Make sure that the power is turned off before proceeding.
- 9 - OPERA TING INSTRUCTIONS 1. MAIN ON/OFF SWITCH The On/Off switch supplies power to all of the functions of the fireplace. This is an illuminated switch which normally will light up when in the "on" position. The control compartment is located behind the lower louvre panel.
- 10 - REPLACEMENT P ARTS - ELECTRIC FIREPLACE.
- 11 - REPLACEMENT P ARTS LIST - ELECTRIC FIREPLACE D ESCRIPTION P ART N O . 1. Log Set Complete 10001682 1a. Log Ember Bed A12 1b. Log Front Left A13 1c. Log Front Right A14 1d. Log Rear Left A15 1e. Log Rear Right A16 2. Fan/Heater Assembly w/bracket 10003009 3.
- 12 - OPTIONS Description Order Part Number Trim Kit - Polished Brass DV33TKP (Fitting instructions included in kit) Medium Trim Kit - Polished Brass DV33TKMP (Fitting instructions included in kit) W.
An important point after buying a device Vermont Castings DEF33CE (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vermont Castings DEF33CE yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vermont Castings DEF33CE - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vermont Castings DEF33CE you will learn all the available features of the product, as well as information on its operation. The information that you get Vermont Castings DEF33CE will certainly help you make a decision on the purchase.
If you already are a holder of Vermont Castings DEF33CE, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vermont Castings DEF33CE.
However, one of the most important roles played by the user manual is to help in solving problems with Vermont Castings DEF33CE. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vermont Castings DEF33CE along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
