Instruction/ maintenance manual of the product CD7106VI Venturer
Go to page of 15
C D S y s t e m f o r i P o d M i c r o I N S T R U C T I O N M A N U A L Model: CD7106Vi R.
- 1 - For the Customers in Canada This apparatus complies with the Class B limits for radio noise emission set out in radio interference regulations. W ARNINGS: • T O PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THE UNIT TO RAIN OR MOISTURE. • T O A V OID ELECTRICAL SHOCK, DO NO T OPEN THE CABINET .
- 2 - On Use Never use the unit where it would be subject to: - Heat sources such as radiators or air ducts. - Direct sunlight. - Excessive dust. - Moisture or rain. - Mechanical vibration or shock. - Uneven surface. • Do not place any heavy objects on top of the unit.
- 3 - SYSTEM CONNECTIONS Using the AC Adapter Using an AC adapter other than the one supplied with the unit may damage the unit. This AC adapter operates on AC 100-120V~50/60Hz. CAUTIONS: • Before use, ensure the rated voltage of the adapter matches your local voltage.
- 4 - REMO TE CONTR OL Using the Remote Control Correctly • P oint the remote control at the REMOTE SENSOR located on the unit. • When there is a strong ambient light source, the performance of the infrared REMOTE SENSOR may be degraded, causing unreliable operation.
- 5 - LOCA TION OF CONTROLS 7. iP od Docking 8. ST ANDBY Indicator 9. TIMER Indicator 10 . Remote Sensor 11 . - V OL + Buttons 12. / - TUNING + / Button 13 . OPEN Knob 14 . CD Door 15. Earphone Jack 1. LCD Display 2. ST ANDBY/ON Button MEM.UP/ Button 3.
- 6 - 1. Press and hold the PROG/MEM/ button until the hour digits blink. 2. Press the or button to adjust the desired hours then press the PROG/MEM/ button once to confirm. The minute digits will begin to blink. 3. Press the or button to adjust the desired minutes then press the PROG/MEM/ button once to start clock.
- 7 - LISTENING T O THE RADIO Presetting Stations The unit can store a total of 20 stations in memory (10FM, 10AM). Presetting allows you to tune in to a station directly. 1. Tune in to a desired station. 2. Press the PROG/MEM/ button. The preset number will blink and the “ MEM ” indicator will be shown on the display.
- 8 - Repeat Current Track • Press the MEM.UP/ button until “ ” blinks on the displa y . The current tr ack will be pla yed repeatedly . Repeat the Entire CD • Press the MEM.UP/ button until “ ” stops blinking and remains on. All tracks will be played repeatedly .
- 9 - LISTENING T O Y OUR iP od Installing the iPod Dock Adapter 1. Choose the iPod Dock Adapter that fits your iPod (if the adapter is not included in the accessory, please use it that comes with your iPod).. 2. Insert your iPod Dock Adapter into the dock until it sits firmly in place.
- 10 - LISTENING T O Y OUR iP od Random Playback Random plays songs/albums from your iPod in a random order. 1. Press the RANDOM button on the remote control once and the random indicator appears on the iPod screen. All songs will be played without sequence.
- 11 - TIMER SETTING T o Cancel Timer • Press and hold the TIMER button on the remote control until the TIMER indicator goes out. The timer function will turn the unit on at a preset time. T o Set Timer 1. In standby mode, press and hold the TIMER b utton on the remote control until the TIMER indicator blinks.
- 12 - TR OUBLESHOO TING GUIDE Design and specifications are subject to change without notice. Cleaning the Unit Do not use volatile chemicals on this unit. Clean by lightly wiping with a soft cloth. Cleaning the CD If the CD skips or will not play, the disc may need to be cleaned.
- 13 - LIMITED W ARRANTY VENTURER ELECTRONICS (“VENTURER”) mak es the f ollowing limited warranty . This limited warranty extend to the original consumer purchaser and is limited to non-commercial use of the product.
- 14 - Printed in China 811-710691W080 Important: Also keep your "Bill of Sale" as proof of purchase. All warranties implied by state law, including the implied warranties of merchantability and fitness for a particular purpose, are expressly limited to the duration of the limited warranties set forth above.
An important point after buying a device Venturer CD7106VI (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Venturer CD7106VI yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Venturer CD7106VI - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Venturer CD7106VI you will learn all the available features of the product, as well as information on its operation. The information that you get Venturer CD7106VI will certainly help you make a decision on the purchase.
If you already are a holder of Venturer CD7106VI, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Venturer CD7106VI.
However, one of the most important roles played by the user manual is to help in solving problems with Venturer CD7106VI. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Venturer CD7106VI along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
