Instruction/ maintenance manual of the product VP100L Venture Products
Go to page of 17
VENTURE bvba Hanendreef 23 – 2930 Brasschaat – Belgium Tel : +32-36530732 Fax : +32-36531349 Email : info@ ventur eaud io. com Website : www.venture-audio.
2 USER ’S I NST RUC TIO NS WARNING: POTENTIAL SHOCK HAZARD! This symbol is intended to alert the user of the presence of import ant operating and maintenance (servicin g) instructions in the literat.
3 USER ’S I NST RUC TIO NS INDE X I. FOREWORD ....................................................................................................................... ...... 4 1. CONGRATULATION S! ................... ....................... .........
4 USER ’S I NST RUC TIO NS I. FOREWORD 1. CONGRATULATIONS! You just purchased the VP100L preamplifier. VENTURE AUDIO first wants to thank you for your trust and support. VP100L is the result of VENTURE’s many years of studies and research and extensive experience in designing High Performance Audio systems.
5 USER ’S I NST RUC TIO NS II. SAFETY INSTRUCTIONS Before operating your VENTURE appliance, please read all instructions and cautions carefully and completely . 9 ALWAYS disconnect your entire s ystem from the AC mains before connecting or disconnecting any cables, or when cleaning any component.
6 USER ’S I NST RUC TIO NS III. OVERVIEW 1. UNPACKING Your package contains: ) VP100L preamplifier. ) Rc5 remote control, delivered with two Lr03 batteries (type AAA). ) External power-supply unit ) 10-pins power cord to plug between t he preamplifier and the power-supply unit ) Mains power cord ) This user manual.
7 USER ’S I NST RUC TIO NS IV. DESCRIPTIO N O F APPLIANCE EL EMENTS 1. FRONT PANEL c Selector knob to exit Set-up d Preamplifier offset security LED (default off) e Digital display f Volume knob to access Set-up 2.
8 USER ’S I NST RUC TIO NS 3. REMOTE CONTROL Infrared LED emitter (1) Switch on/off the digital display. (2) Mutes the sound or back to previous volume. (3) Selects inpu ts (-). (4) Lowers sound volume (-). (5) Sets the amplifiers in Stand-By mode (6) Wakes up the amplifiers (Stand-by off) (7) Selects inpu ts (+).
9 USER ’S I NST RUC TIO NS V. OPERATION INSTRUCTIONS 1. POWER SWITCH After having connected the inputs to the co rresponding appliances (CD player, Phono preamp, tape, tuner.
10 USER ’S I NST RUC TIO NS 3. DISPLAYS DES CRIPTIONS Standard display at start-up will show VP100 or VP100L accordingly After start-up, the display shows the volume (attenuation level) of - 66dB, and the first input RCA1 is activated.
11 USER ’S I NST RUC TIO NS LEARN RC5 ERRO R To use this functionality, select ON then exit the set-up. The screen displays LEARN RC5 ERROR. Now press any key from the remote control. The operati on is complete. Th e preamplifier displays back its welcome screen.
12 USER ’S I NST RUC TIO NS 4. SEC URITY V ENTURE AUDIO appliances are designed to operate in a perfect reliable and durable condition. This operation can however be infl uenced by external events. Some of them will require the action of the inner VP100L security system.
13 USER ’S I NST RUC TIO NS VI. SPECIFIC ATIONS Main section : Type: Preamplifier Volume: -66dB to 0dB Unbalanced Gain: 0dB Balanced Gain: 6dB Harmonic Distortion: <0.01% / 600 Ohms / 2Volts Noise: <2.8µV (Typ.1,9µV) Signal-to-Noise ratio: > 120dB Offset: <0.
14 USER ’S I NST RUC TIO NS VII. WARRANTY 1. DURATION VENTURE AUDIO products have limited warranty to be free of defects for a period of two (2) ye ars from the date of purchase. 2. CONDITIONS This warranty is subject to the following conditions and limitat ions.
15 USER ’S I NST RUC TIO NS QUESTIONS AND ANSWERS ) What difference between VENTURE and standard stand-by mode? VENTURE stand-by mode does not switch off fully t he appliance. Only the power stages are shut-off. They are the main current consumers. The heart of the amplifier stays warm and operational.
16 USER ’S I NST RUC TIO NS ) The appliance does not switch on. No sound comes out. What can I do? We can only provide some clues to help you che ck the main issues.
17 USER ’S I NST RUC TIO NS ) What are the security system-call causes ? See security chapter for more explanations. Cause External fuse Internal relay Comment / solution Over-tension (mains provider) X Rare. Change the fuse. Un plug and switch back on.
An important point after buying a device Venture Products VP100L (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Venture Products VP100L yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Venture Products VP100L - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Venture Products VP100L you will learn all the available features of the product, as well as information on its operation. The information that you get Venture Products VP100L will certainly help you make a decision on the purchase.
If you already are a holder of Venture Products VP100L, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Venture Products VP100L.
However, one of the most important roles played by the user manual is to help in solving problems with Venture Products VP100L. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Venture Products VP100L along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
