Instruction/ maintenance manual of the product VX-10 Velodyne Acoustics
Go to page of 20
Audio/Video Subwoofer VX-10 Owner's Manual Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax Web Site: www.velodyne.com Technical e-mail: techhelp@velodyne.com Service e-mail: service@velodyne.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Vorsicht : Zur Vermeidung von Gefahr durch elektrischen Schlag, Deckel (oder Rückwand) nicht abnehmen. Produkt enthält keine Anwenderteile. Reparatur und Wartung nur von qualifiziertem Fachpersonal vornehmen lassen.
Attention: Afin d’éviter tout risque d’électrocution, ne pas enlever le boitier (ou partie arrière de l’enceinte). Aucune pièce ne doit être manipulée par l’utilisateur . P our tout entretien, vous référer à un personnel de service qualifié.
Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the state of the art in home audio reproduction and will provide you with years of listening pleasure when properly cared for. Read and follow this instruction manual to insure safe and proper system connection and operation.
Product Features • 10" (8.5" piston diameter) subwoofer with 2.0" high-temp voice coil and 40 ounce motor structure • Adjustable (50 to 200Hz) low-pass crossover • Line-level (RCA.
Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer facing forward). Using, shipping, or otherwise storing the subwoofer in any other position for an extended period of time may result in damage to the unit not covered by warranty.
Low-pass crossover - 50 to 200Hz All inputs sum the left and right channels together, with the resulting signal passing through an adjustable low-pass crossover before being amplified. The crossover control allows you to adjust the upper limit of the subwoofer's frequency response from 50 to 200Hz.
11 ☞ 8 ☞ Figure 1. Rear panel inputs, output and operational layout. Figure 2a. Line-level subwoofer connection diagram. Speaker Line-level Connections When installed in this fashion the satellite speakers will be crossed over at 80Hz.
9 ☞ 10 ☞ Operational References (see Figure 1, Page 8) A SPEAKER LEVEL INPUT terminals Connect these input terminals to the speaker output terminals of your amplifier or receiver. B SPEAKER LEVEL OUTPUT terminals The speaker-level signal to the front speakers is output from these terminals.
9 ☞ 10 ☞ Operational References (see Figure 1, Page 8) A SPEAKER LEVEL INPUT terminals Connect these input terminals to the speaker output terminals of your amplifier or receiver. B SPEAKER LEVEL OUTPUT terminals The speaker-level signal to the front speakers is output from these terminals.
11 ☞ 8 ☞ Figure 1. Rear panel inputs, output and operational layout. Figure 2a. Line-level subwoofer connection diagram. Speaker Line-level Connections When installed in this fashion the satellite speakers will be crossed over at 80Hz.
Low-pass crossover - 50 to 200Hz All inputs sum the left and right channels together, with the resulting signal passing through an adjustable low-pass crossover before being amplified. The crossover control allows you to adjust the upper limit of the subwoofer's frequency response from 50 to 200Hz.
Regardless of where you install your Velodyne subwoofer, it must remain in an upright position (woofer facing forward). Using, shipping, or otherwise storing the subwoofer in any other position for an extended period of time may result in damage to the unit not covered by warranty.
14 ☞ The following conditions require service by a qualified technician: 1 . The power cord has become damaged. 2 . The unit does not appear to operate normally or exhibits a marked change in performance. 3 . The unit has been exposed to water. 4 . Some part of the cabinet or circuitry is physically damaged.
Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the state of the art in home audio reproduction and will provide you with years of listening pleasure when properly cared for. Read and follow this instruction manual to insure safe and proper system connection and operation.
Attention: Afin d’éviter tout risque d’électrocution, ne pas enlever le boitier (ou partie arrière de l’enceinte). Aucune pièce ne doit être manipulée par l’utilisateur . P our tout entretien, vous référer à un personnel de service qualifié.
Vorsicht : Zur Vermeidung von Gefahr durch elektrischen Schlag, Deckel (oder Rückwand) nicht abnehmen. Produkt enthält keine Anwenderteile. Reparatur und Wartung nur von qualifiziertem Fachpersonal vornehmen lassen.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Audio/Video Subwoofer VX-10 Owner's Manual Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax 408.779.9208 service fax Web Site: www.velodyne.com Technical e-mail: techhelp@velodyne.com Service e-mail: service@velodyne.
An important point after buying a device Velodyne Acoustics VX-10 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics VX-10 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics VX-10 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics VX-10 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics VX-10 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics VX-10, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics VX-10.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics VX-10. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics VX-10 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center