Instruction/ maintenance manual of the product VLF-1012 Velodyne Acoustics
Go to page of 8
Audio/Video Subwoofer System VLF-810 and VLF-1012 Owner's Manual Velodyne Acoustics, Inc. 1070 Commercial St. Suite #101 San Jose, CA 95112 408.436.
FOR YOUR RECORDS. . . DATE PURCHASED ____________________________________ DEALER ______________________________________________ ____ SERIAL # _____________________________________________ * NOTE: Please complete and return your warranty card within ten (10) days.
Vorsicht : Zur Vermeidung von Gefahr durch elektrischen Schlag, Deckel (oder Rückwand) nicht abnehmen. Produkt enthält keine Anwenderteile. Reparatur und Wartung nur von qualifiziertem Fachpersonal vornehmen lassen.
continued. . . IMPOR T ANTES CONSIGNES DE SECURITE Attention: Afin d’éviter tout risque d’électrocution, ne pas enlever le boitier (ou partie arrière de l’enceinte). A ucune pièce ne doit être manipulée par l’utilisateur . P our tout entretien, v ous référer à un personnel de service qualifié.
continued. . . Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the state of the art in home audio reproduction and will provide you with years of listening pleasure when properly cared for. Read and follow this instruction manual to insure safe and proper system connection and operation.
continued. . . Figure 1. Installation Using Line-level Inputs Product Features • 8" woofer with 10" passive or 10" woofer with 12" passive • Built-in 350 peak/125 watts RMS (VL.
continued. . . Caution! This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc. Do not place the unit near sources of excessive moisture, such as evaporative coolers, humidifiers, etc.
continued. . . disengage the built in crossover. For all other installations which do not have a separate electronic crossover, we recommend you leave the internal crossover INTERNAL X-OVER to provide optimum performance.
An important point after buying a device Velodyne Acoustics VLF-1012 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics VLF-1012 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics VLF-1012 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics VLF-1012 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics VLF-1012 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics VLF-1012, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics VLF-1012.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics VLF-1012. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics VLF-1012 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
