Instruction/ maintenance manual of the product VA-907.2 Velodyne Acoustics
Go to page of 6
Velodyne Acoustics, Inc. 1070 Commercial St. Suite #101 San Jose, CA 95112 408.436.7270 voice 408.436.7276 fax Web Site: http//www.velodyne.com E-mail: velodyne@earthlink.
1 10 ☞ CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution To reduce the risk of electric shock, do not remove back panel. No user-serviceable parts inside.
Congratulations! Congratulations on your purchase of a Velodyne VA-907.2 sub- woofer system. This system represents the state of the art in accurate low frequency reproduction. Read and follow the instruc- tions below to insure safe and proper system operation.
3 ☞ 8 ☞ enced by placement, depending on the acoustic properties of the listening room. Typically, the optimum location for a subwoofer is tucked away in a corner of your listening room. This location will usually offer the greatest output levels and optimum low frequency extension.
Interconnect cables When installing your VA-907.2 using the line-level inputs/outputs, you should use standard shielded phono cables. Always keep the lines as short as practical to minimize noise. When using the speaker-level inputs/outputs, use the same quality speaker cable to your subwoofer as you run to your satellites.
mance you should bypass the internal crossover in your Velodyne subwoofer, the Subwoofer Direct feature. To bypass the crossover within the subwoofer, simply locate the switch marked "out / in" on the back panel of the subwoofer and set to the "out" position.
An important point after buying a device Velodyne Acoustics VA-907.2 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics VA-907.2 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics VA-907.2 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics VA-907.2 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics VA-907.2 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics VA-907.2, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics VA-907.2.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics VA-907.2. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics VA-907.2 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
