Instruction/ maintenance manual of the product VA-806/907 Velodyne Acoustics
Go to page of 6
Velodyne Acoustics, Inc. 1070 Commercial St. Suite #101 San Jose, CA 95112 408.436.7270 voice 408.436.7276 fax Web Site: http//www.velodyne.com E-mail: velodyne@earthlink.
1 10 ☞ FOR YOUR RECORDS. . . DATE PURCHASED _______________________________ DEALER ________________________________________ SERIAL# ________________________________________ *NOTE: Please complete and return your warranty card within ten (10) days.
Congratulations! Congratulations on your purchase of a Velodyne VA-806/907 subwoofer system. This system represents the state of the art in accurate low frequency reproduction. Read and follow the instruc- tions below to insure safe and proper system operation.
3 ☞ 8 ☞ When using a pair of VA-806/907 subwoofers in stereo, it is preferable to place each subwoofer adjacent to the satellite of the same channel. Keep in mind that frequency response and output level can be drastically influenced by placement depending on the acoustic properties of the listening room.
Interconnect cables When installing your VA-806/907 using the line-level inputs/out- puts, you should use standard shielded phono cables. Always keep the lines as short as practical to minimize noise. When using the speaker-level inputs/outputs, use the same quality speaker cable to your subwoofer as you run to your satellites.
A word about subwoofer outputs The Velodyne subwoofer is designed to operate using the full range audio signal for input when using the built-in crossover. Some surround sound processors/receivers have a "subwoofer out" jack that is already crossed over and designed to be used with a conventional amplifier and speaker.
An important point after buying a device Velodyne Acoustics VA-806/907 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics VA-806/907 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics VA-806/907 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics VA-806/907 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics VA-806/907 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics VA-806/907, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics VA-806/907.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics VA-806/907. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics VA-806/907 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
