Instruction/ maintenance manual of the product SPL-1200 Velodyne Acoustics
Go to page of 8
Audio/Video Subwoofer System SPL-800 SPL-1000 and SPL-1200 Owner's Manual Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Vorsicht : Zur Vermeidung von Gefahr durch elektrischen Schlag, Deckel (oder Rückwand) nicht abnehmen. Produkt enthält keine Anwenderteile. Reparatur und Wartung nur von qualifiziertem Fachpersonal vornehmen lassen.
continued. . . Attention: Afin d’éviter tout risque d’électrocution, ne pas enlever le boitier (ou partie arrière de l’enceinte). A ucune pièce ne doit être manipulée par l’utilisateur . P our tout entretien, v ous référer à un personnel de service qualifié.
continued. . . Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the state of the art in home audio reproduction and will provide you with years of listening pleasure when properly cared for. Read and follow this instruction manual to insure safe and proper system connection and operation.
Product Features • 8" (6.5" piston diameter) subwoofer with 2.5" high-temp voice coil and 107 ounce magnet/204 ounce motor structure; 10" (8" piston diameter) or 12" (9.
continued. . . location will usually offer the greatest output levels and optimum low frequency extension. The worst location for a subwoofer is typically far away from any walls, and close to the center of your room. Avoid these locations when possible.
continued. . . signal processor, line-level crossover, or receiver with pre-amp level outputs. The SPEAKER LEVEL jacks connect directly to the speaker outputs of any amplifier, integrated amplifier, or receiver. Your amplifier section will notice no additional loading effects when you use these inputs due to their very high impedance.
An important point after buying a device Velodyne Acoustics SPL-1200 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics SPL-1200 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics SPL-1200 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics SPL-1200 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics SPL-1200 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics SPL-1200, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics SPL-1200.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics SPL-1200. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics SPL-1200 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
