Instruction/ maintenance manual of the product HGS-15X THX Velodyne Acoustics
Go to page of 20
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax www.velodyne.com Service E-mail: service@velodyne.
15 ☞ Installation W orksheet Date: _____________ Model/Serial # ________________ Installed by: ____________________ Phone: _______________ Volume Setting: ____________ Output Level (dB): _________ Low Pass X-Over: _________ Hz Phase Pos.
13 ☞ The following conditions require service by a qualified technician: 1 . The power cord has become damaged. 2 . The unit does not appear to operate normally or exhibits a marked change in performance. 3 . The unit has been exposed to water. 4 . Some part of the cabinet or circuitry is physically damaged.
SPECIFICATIONS HGS-15X THX Ultra 2 Cabinet (H/W/D) 19.75" x 18" x 17-7/8" (49 x 45 x 45 cm) Frequency Response 18Hz - 120Hz +/- 3 dB Harmonic Distortion less than .
1 ☞ Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the absolute state of the art in accurate low frequency reproduction.
2 ☞ Product Features and Controls • 15" (12.7" piston diameter) subwoofer with tandem 3" voice coils and 220 oz. magnet • Built-in 1250 watt (RMS) high efficiency class D amplifie.
3 ☞ Important!!! Do not use both LINE LEVEL and SPEAKER LEVEL connections simultaneously! Volume control This control allows you to balance the output from the subwoofer to the main speakers/amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
4 ☞ A bypass switch is also provided if you wish to use an external crossover. If you are not using an external crossover, we recommend that you use the one provided within the unit for optimum perf.
External remote jack This connection allows an auxiliary infrared remote receiver "eye" to be installed and placed where most convenient. This option is usually only required when the subwoo.
6 ☞ 7 ☞ Subwoofer outputs The Velodyne subwoofer is designed to operate using the full range audio signal for input when using the built-in crossover. Some processors/receivers, have a "subwoofer out" jack that is internally filtered and designed to be used with a conventional amplifier and speaker.
6 ☞ 7 ☞ Subwoofer outputs The Velodyne subwoofer is designed to operate using the full range audio signal for input when using the built-in crossover. Some processors/receivers, have a "subwoofer out" jack that is internally filtered and designed to be used with a conventional amplifier and speaker.
External remote jack This connection allows an auxiliary infrared remote receiver "eye" to be installed and placed where most convenient. This option is usually only required when the subwoo.
4 ☞ A bypass switch is also provided if you wish to use an external crossover. If you are not using an external crossover, we recommend that you use the one provided within the unit for optimum perf.
3 ☞ Important!!! Do not use both LINE LEVEL and SPEAKER LEVEL connections simultaneously! Volume control This control allows you to balance the output from the subwoofer to the main speakers/amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
2 ☞ Product Features and Controls • 15" (12.7" piston diameter) subwoofer with tandem 3" voice coils and 220 oz. magnet • Built-in 1250 watt (RMS) high efficiency class D amplifie.
1 ☞ Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the absolute state of the art in accurate low frequency reproduction.
13 ☞ The following conditions require service by a qualified technician: 1 . The power cord has become damaged. 2 . The unit does not appear to operate normally or exhibits a marked change in performance. 3 . The unit has been exposed to water. 4 . Some part of the cabinet or circuitry is physically damaged.
SPECIFICATIONS HGS-15X THX Ultra 2 Cabinet (H/W/D) 19.75" x 18" x 17-7/8" (49 x 45 x 45 cm) Frequency Response 18Hz - 120Hz +/- 3 dB Harmonic Distortion less than .
15 ☞ Installation W orksheet Date: _____________ Model/Serial # ________________ Installed by: ____________________ Phone: _______________ Volume Setting: ____________ Output Level (dB): _________ Low Pass X-Over: _________ Hz Phase Pos.
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465.2800 voice 408.779.9227 fax www.velodyne.com Service E-mail: service@velodyne.
An important point after buying a device Velodyne Acoustics HGS-15X THX (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics HGS-15X THX yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics HGS-15X THX - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics HGS-15X THX you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics HGS-15X THX will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics HGS-15X THX, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics HGS-15X THX.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics HGS-15X THX. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics HGS-15X THX along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
