Instruction/ maintenance manual of the product HGS-12X Velodyne Acoustics
Go to page of 10
Velodyne Acoustics, Inc. 345 Digital Drive Morgan Hill, CA 95037 408.465-2800 voice 408.779-9227 fax www.velodyne.com Service E-mail: service@velodyne.com Product E-mail: help@velodyne.com Technical E-mail: techhelp@velodyne.com HGS-12X Owner's Manual High Gain Servo-Controlled A udio/Video Subwoof er System Printed on recycled paper.
Other V elodyne Subwoof er Products: VX-10 DLS Series DLS-3500 DLS-3750 DLS-4000 CHT Series CHT -8 CHT -10 CHT -12 CHT -15 CHT F ront Row System CHT -14 Satellites CHT -24 Center Channel Deco System D.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Vorsicht : Zur Vermeidung von Gefahr durch elektrischen Schlag, Deckel (oder Rückwand) nicht abnehmen. Produkt enthält keine Anwenderteile. Reparatur und Wartung nur von qualifiziertem Fachpersonal vornehmen lassen.
continued. . . T roubleshooting and Service I f you should experience a problem with the operation of your subwoofer, please check all of the following before seeking service. Following is a simple troubleshooting guide to assist you. 1. Verify unit is plugged in and power outlet used is active.
1 10 continued. . . ☞☞ Congratulations! Congratulations on your purchase of a Velodyne subwoofer system. This system represents the absolute state of the art in accurate low frequency reproduction.
2 9 continued. . . ☞☞ Installation Your new Velodyne servo subwoofer provides for a number of installation options. Read all the installation information below in order to determine which installation option is best for your system.
8 3 ☞☞ Volume control This control allows you to balance the output from the subwoofer to the main speakers/amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
4 7 continued. . . ☞☞ Crossover switch - In/Out This switch allows the electronic crossover circuitry to be removed from the signal path. This is preferable in certain installations which route the signal through external processors with a crossover circuit of their own, such as the new digital units.
receivers, have a "subwoofer out" jack that is internally filtered and designed to be used with a conventional amplifier and speaker. In some rare cases, combining both an external crossover and the one internal to the subwoofer may result in low output and increased noise.
An important point after buying a device Velodyne Acoustics HGS-12X (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics HGS-12X yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics HGS-12X - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics HGS-12X you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics HGS-12X will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics HGS-12X, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics HGS-12X.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics HGS-12X. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics HGS-12X along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
