Instruction/ maintenance manual of the product HGS 12 Velodyne Acoustics
Go to page of 10
Velodyne Acoustics, Inc. 1070 Commercial St. Suite #101 San Jose, CA 95112 408.436.7270 voice 408.436.7276 fax Service Department - Ext. 3019 Product Questions - Ext.
Other V elodyne Subwoofer Products: F Series FSX-12 FSR-10 FSR-12 FSR-15 FSR-18 V A-X Series V A-8100X V A-1012XII V A-1250X CT Series CT -80 CT -100 CT -120 CT -150 To request literature on any of th.
Caution: To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside. Refer servicing to qualified service personnel.
Vorsicht : Zur Vermeidung von Gefahr durch elektrischen Schlag, Deckel (oder Rückwand) nicht abnehmen. Produkt enthält keine Anwenderteile. Reparatur und Wartung nur von qualifiziertem Fachpersonal vornehmen lassen.
continued. . . Troubleshooting & Service ––––––––––––––––––––––––––––––––––––––––––––––——————–––––– If you should experience a problem with the operation of your subwoofer, please check all of the following before seeking service.
1 10 continued. . . ☞☞ Congratulations! –––––––––––––––––––––––––––––––––––––––––––––––—————– Congratulations on your purchase of a Velodyne subwoofer system.
2 9 continued. . . ☞☞ Installation —————————————————————————————————————————————— Your new Velodyne servo subwoofer provides for a number of installation options.
8 3 ☞☞ Volume control This control allows you to balance the output from the subwoofer to the main speakers/ amplifier in your system. This control should be set to achieve similar output level from both the main speakers and subwoofer when listening to music.
4 7 continued. . . ☞☞ Crossover switch- In/Out This switch allows the electronic crossover circuitry to be removed from the signal path. This is preferable in certain installations which route the signal through external processors with a crossover circuit of their own, such as the new digital units.
When installed in this fashion, your satellite speakers will be crossed over at 80Hz which removes the lower bass from your amplifier and speakers, enabling them to do a better job reproducing high frequencies. By utilizing this method, you will have a bi-amplified system, gaining improved power and headroom for your system.
An important point after buying a device Velodyne Acoustics HGS 12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics HGS 12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics HGS 12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics HGS 12 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics HGS 12 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics HGS 12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics HGS 12.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics HGS 12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics HGS 12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
