Instruction/ maintenance manual of the product FSX-12 Velodyne Acoustics
Go to page of 8
Velodyne Acoustics, Inc. 1070 Commercial St. Suite #101 San Jose, CA 95112 408.436.7270 voice 408.436.7276 fax Web Site: http://www.velodyne.com E-mail: velodyne@earthlink.net FSX-12 Owner's Manual SERVO-CONTROLLED Audio/Video Subwoofer System Printed on recycled paper.
1 14 CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN Caution To reduce the risk of electric shock, do not remove cover (or back). No user-serviceable parts inside.
2 13 Troubleshooting & Service ––––––––––––––––––––––––––––––––––––––––––––––——————————– If you should experience a problem with the operation of your subwoofer, please check all of the following before seeking service.
3 12 Installation –––––––––––––––––––––––––––––––––––––––––––––––––—————––––– Your new Velodyne servo subwoofer provides for a number of installation options.
11 4 woofers actually add to the bass spectrum making it appear louder than recorded. This is due to the additional and unwanted harmonics (distortion) of the fundamental signal. While conventional subwoofers offer little to combat distortion products, we at Velodyne have developed another way.
10 5 Subwoofer Direct switch- In/Out This switch allows the electronic crossover circuitry to be removed from the signal path. This is required in certain installations which route the signal through external processors with a crossover circuit of their own, such as the new digital units.
6 9 locations when possible. When using a pair of Velodyne subwoofers in stereo, it is preferable to place each subwoofer by the satellite of the same channel. Caution! This subwoofer has electronics built into the cabinet. Do not place the cabinet next to sources of heat such as furnace registers, radiators, etc.
8 7 continued. . . ☞ ☞ Note. . . . If not using an external crossover, you should use the built-in crossover for optimal performance. Speaker-level connection ––––––––––––.
An important point after buying a device Velodyne Acoustics FSX-12 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Velodyne Acoustics FSX-12 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Velodyne Acoustics FSX-12 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Velodyne Acoustics FSX-12 you will learn all the available features of the product, as well as information on its operation. The information that you get Velodyne Acoustics FSX-12 will certainly help you make a decision on the purchase.
If you already are a holder of Velodyne Acoustics FSX-12, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Velodyne Acoustics FSX-12.
However, one of the most important roles played by the user manual is to help in solving problems with Velodyne Acoustics FSX-12. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Velodyne Acoustics FSX-12 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
