Instruction/ maintenance manual of the product VECTORLITE VEC118S Vector
Go to page of 10
VEC118S THIS MANUAL CONT AINS IMPOR T ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . BEFORE USING, READ AND UNDERST AND ALL CAUTIONS, W ARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE'S BA TTER Y MANUF ACTURER GUIDELINES.
2 IMPOR T ANT SAFETY INSTRUCTIONS W ARNINGS : Contains non-spillable, sealed, lead acid batter y . Must be recycled or disposed of properly . DO NOT dispose of batteries in fire, as this may result in an explosion. DO NOT open batter y or shor t circuit, as this may cause the bat- ter y to leak or get hot, causing personal injur y .
3 1. INTRODUCTION Congratulations on purchasing V ectorLite TM Model VEC118S, an advanced design combination spotlight and long lasting, soft incandescent area light. It uses two power ful proven-technology rechargeable, non-spillable, sealed, lead acid batteries that allow for years of dependable use, recharge after recharge.
3. OPERA TION The trigger switch is squeezed to turn on the spotlight. This provides momentar y operation. The trigger switch may be locked in the ON position to provide continuous light without continuously squeezing the trigger switch. T o lock the trigger switch ON, move the trigger lock to the up position.
5 4. CHARGING THE VECTORLITE USING AC RECHARGE ADAPTER 1. Locate the recharge por t on the side of the spotlight (see figure 1). 2. Connect the charger to an appropriate AC power source. 3. Plug the charger's barrel connecter into the recharge por t located near the handle.
5. PERIODIC MAINTENANCE All batteries lose charge over time, especially when they are warm. AC recharge is recommended ever y two months, when not in frequent use.
10. Inser t the replacement bulb into the reflector's flange. 11. Put back and secure the hairpin retaining wires. 12. Connect the white bulb power wire to the red power wire. 13. Tighten the retaining screw on the flange. 14. Place the reflector in position in the body of the spotlight.
8 REPLACING THE BA TTERIES The rechargeable, sealed, lead acid batteries have a life of several years, if recharged promptly after each use. When the fully charged batteries only provide about 10 minutes or less of spotlight operation, they should be replaced with new batteries.
9 W ARNINGS: DO NOT ALLOW BARE WIRES OR CONNECTORS TO CON- T ACT EACH OTHER DANGEROUS SP ARKING CAN OCCUR - NOTE WHICH WIRES ARE ON THE BA TTER Y TERMINALS 6. Note position of batter y . Note which wire is on which ter minal. 7. Disconnect the wires from the batter y and set the batter y aside.
© 2002 VECTOR MANUF ACTURING, Ltd. FT . LAUDERDALE, FL 33312 MADE IN CHINA TWO YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Manufacturing, Ltd.
An important point after buying a device Vector VECTORLITE VEC118S (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector VECTORLITE VEC118S yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector VECTORLITE VEC118S - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector VECTORLITE VEC118S you will learn all the available features of the product, as well as information on its operation. The information that you get Vector VECTORLITE VEC118S will certainly help you make a decision on the purchase.
If you already are a holder of Vector VECTORLITE VEC118S, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector VECTORLITE VEC118S.
However, one of the most important roles played by the user manual is to help in solving problems with Vector VECTORLITE VEC118S. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector VECTORLITE VEC118S along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center