Instruction/ maintenance manual of the product VEC022APC Vector
Go to page of 16
1 OWNER’S MANUAL & WARRANTY INFORMA TION Jump-Start System 260 PSI AIR COMPRESSOR • 12 VOL T DC POWER SUPPL Y VEC022APC THIS MANUAL CONT AINS IMPORTANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT .
2 CONTENTS 1. INTRODUCTION ....................................................................................... 5, 6 2. USING VECTOR JUMPER AS A JUMP-ST ART SYSTEM ................................ 7 2.1 Easy , Step-by-Step Jump-starting Instructions .
3 SAFETY INFORMA TION W ARNING: (W arning statements identify conditions or practices that may result in personal injur y or loss of life) 1) When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency .
4 IMPORT ANT : Although this unit is delivered in a partially charged state, you must fully charge it with the supplied 110/120 V olt AC charger for a full 24 hours before using it for the first time. Y ou cannot overcharge the unit using the AC charger method.
5 1. INTRODUCTION Congratulations on selecting the VECTOR® JUMP-ST ARTER, AIR COMPRESSOR and 12 VOLT DC POWER SUPPL Y . This compact jump-starter is unique in the amount of energy it can supply for its size.
6 FIGURE 1A (FRONT VIEW) FIGURE 1B (REAR VIEW) 1. Reverse connection indicator 2. Good connection indicator 3. 12 V olt DC Accessor y Socket with 20 amp overload protection 4. Batter y Level Push Button 5. LED Charging/Batter y Level Indicators 6. Heavy-Duty W elding Quality Jumper Cables 7.
7 2. USE AS A JUMP-ST ART SYSTEM W ARNING: 1. Before using this system to jump-start any vehicle or boat, read and understand all instructions, safety tips, warnings, cautions and first aid information provided in this manual and on the product labeling.
8 2.1 EASY , STEP-BY -STEP JUMP-ST ARTING INSTRUCTIONS This jump-starter is equipped with an automatic safety switch that only allows jump-start energy to flow when proper connections are made to batter y and frame. The automatic switch works in conjunction with an audible reverse polarity alarm and a large red LED.
9 • Always use protective eyewear when using this product: contact with batter y acid may cause blindness and/or severe burns • Keep out of children’ s reach • AL W A YS store battery clamps i.
10 3.2 12 VOL T DC CHARGING 1. Insert one end of the DC/DC charging adapter into a 12 V olt DC accessor y receptacle on the vehicle or boat. 2. Insert the plug at the other end of this charging adapter into the 12 V olt DC accessor y socket receptacle on the front of the unit.
11 5. EMERGENCY WORKLIGHT The W orklight is controlled by an On/Of f switch. Make sure the lamp is turned OFF when the unit is being recharged or stored. The lamp is efficient and will operate up to 114 hours on a full charge. The CCFL lamp’ s operating life is 100,000 hours.
12 6.2 TIRE INFLA TION OR PRODUCTS WITH A V AL VE STEM 1. Place connector (chuck) on valve stem. 2. Push connector toward valve stem and close thumb latch. 3. Make sure connector is pushed onto valve stem as far as possible before closing thumb latch.
13 7. REPLACEMENT P ARTS For replacement parts (bulbs, batteries, fuses, etc.), contact V ector Customer Ser vice: (954) 584-4446 or toll-free (866) 584-5504. 7.1 CCFL CCFL lamp is designed for 100,000 hours of operation. It is not user replaceable. 7.
14 TWO YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Manufacturing, Ltd., regarding this product. There is no other warranty , other than those described herein.
15 Manual 022APC 12/20/02, 8:40 PM 15.
16 © 2002 VECTOR MANUF ACTURING, Ltd. FT . LAUDERDALE, FL 33312 MADE IN CHINA 112202 Manual 022APC 12/20/02, 8:40 PM 16.
An important point after buying a device Vector VEC022APC (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector VEC022APC yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector VEC022APC - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector VEC022APC you will learn all the available features of the product, as well as information on its operation. The information that you get Vector VEC022APC will certainly help you make a decision on the purchase.
If you already are a holder of Vector VEC022APC, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector VEC022APC.
However, one of the most important roles played by the user manual is to help in solving problems with Vector VEC022APC. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector VEC022APC along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
