Instruction/ maintenance manual of the product VEC022 Vector
Go to page of 15
1 Jump-Star t System 12 VOL T DC POWER SUPPL Y VEC022 IF YOU SHOULD EXPERIENCE A PROBLEM WITH YOUR PURCHASE CALL TOLL FREE 866-584-5504. IN MOST CASES A SERVICE REPRESENT A TIVE CAN RESOL VE YOUR PROBLEM OVER THE PHONE .
2 CONTENTS 1. INTRODUCTION ..........................................................................................5 2. SAFETY WARNINGS ....................................................................................7 2.1 Jump-starting Instructions .
3 SAFETY INFORMA TION W ARNING: W arning statements identify conditions or practices that may result in personal injur y or loss of life 1. When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency .
4 CAUTION: Caution statements advise against cer tain conditions and practices that may result in damage to vehicles, appliances and/or the Jump- Starter .
5 1. INTRODUCTION Congratulations on selecting the VECTOR ® JUMP-ST ARTER, and 12 VOL T DC POWER SUPPL Y . This compact jump-starter is unique in the amount of energy it can supply for its size. The internal batter y is a high density sealed, lead-acid batter y that stores and delivers energy comparable to full sized ordinar y jump- starters.
6 FIGURE 1A (FRONT VIEW) FIGURE 1B (REAR VIEW) 1. 12 V olt DC Outlets 2. AC Recharge Adapter Barrel Connector Receptacle 3. Built-in LED Emergency/Area light 4. Negative (-) Black Clamp 5. Positive (+) Red Clamp 6. LED Indicators 7. Area light ON/OFF Pushbutton 8.
7 ADDITIONAL FEA TURES: • Includes non-spillable, maintenance-free, heavy-duty , sealed batter y • Sturdy and unique compact design provides completely portable 12 volt DC power • Safe to use, t.
8 3. This system is NOT designed to be installed as a replacement for a vehicle batter y . 4. V ehicles that have on-board computerized systems may be damaged if vehicle batter y is jump-started. Before jump-star ting this type of vehicle, read the vehicle owner’ s manual to confirm that exter nal-starting assistance is advised.
9 CAUTION: • If engine fails to start, leave ignition key tur ned off and disconnect the negative (-) clamp first, then the positive (+) clamp. T r y again later – the engine may be flooded.
10 3.1 110/120 VOL T AC CHARGING 1. Plug the barrel connector end of the AC/DC adapter into the small barrel receptacle port on the jump-star ter . 2. Plug the AC/DC adapter/charger into any standard 110/120 volt AC wall outlet. 3. After initial 48 hour charge, charge this device for at least 24-30 hours or until the green FULL indicator lights.
11 3.4 ESTIMA TED BA TTER Y LIFE T able I shows the relationship of the frequency of use between recharging and the expected number of discharge/recharge cycles. T able I - Estimated Batter y Life between recharges (lifetime of unit’ s batter y) U SE R ECHARGES 1 1000+ 5 700+ 10 500+ 4.
12 6.2 BA TTER Y DISPOSAL: This unit contains a maintenance-free, non-spillable, sealed lead- acid batter y . This battery is fully recyclable and should be accepted at any location that accepts common automotive starter batteries.
13 2-YEAR LIMITED WARRANTY This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Products, Inc., regarding this product. There is no other warranty , other than those described herein.
14 VEC022 Manual_Final_073106.qxp 7/31/06 6:36 PM Page 14.
DS073106 VEC022 Manual_Final_073106.qxp 7/31/06 6:36 PM Page 15.
An important point after buying a device Vector VEC022 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector VEC022 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector VEC022 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector VEC022 you will learn all the available features of the product, as well as information on its operation. The information that you get Vector VEC022 will certainly help you make a decision on the purchase.
If you already are a holder of Vector VEC022, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector VEC022.
However, one of the most important roles played by the user manual is to help in solving problems with Vector VEC022. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector VEC022 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
