Instruction/ maintenance manual of the product VEC016 Vector
Go to page of 12
1 OWNER’S MANUAL & W ARRANTY INFORMA TION ST ART -IT ® COMP ACT VEC016 THIS MANUAL CONT AINS IMPORT ANT INFORMA TION REGARDING SAFETY , OPERA TION, MAINTENANCE AND STORAGE OF THIS PRODUCT . BEFORE USING, READ AND UNDERST AND ALL CAUTIONS, W ARNINGS, INSTRUCTIONS AND PRODUCT LABELS, PLUS YOUR VEHICLE’S BA TTER Y MANUF ACTURER GUIDELINES.
2 SAFETY INFORMA TION WARNINGS: WARNING ST A TEMENTS IDENTIFY CONDITIONS OR PRACTICES THA T MA Y RESUL T IN PERSONAL INJURY OR LOSS OF LIFE. 1) When working with lead acid batteries, always make sure immediate assistance is available in case of accident or emergency .
3 IMPORT ANT : Although this unit is delivered in a partially-charged state - you must fully charge it with the supplied 110/120 V olt AC charger for a full 24 hours before using it for the first time. Y ou can not overcharge the unit using the AC charger method.
4 CONTENTS 1. INTRODUCTION ............................................................ 5 1.1 ADDITIONAL KEY FEA TURES .................................................... 6 1.2 USES OF ST ART–IT COMP ACT ............................................
5 1. INTRODUCTION Congratulations on selecting the V ector® Model VEC016 Compact Jump Starter and DC Power System. It can jumpstart most vehicles or boats with a standard 12 volt DC electrical system: boat, small truck, car , airplane, RV , personal watercraft, snowmobile, tractor , etc.
6 Moving to the left of the AC recharge port are three LEDs, called the Batter y Status Display , and a Batter y Status Pushbutton. Pressing the pushbutton turns on the Batter y Status Display . The pushbutton is pressed to check the batter y level at any time.
7 READ INSTRUCTION MANUAL AND PRODUCT LABELING CAREFULL Y , BEFORE USING THIS PRODUCT . FOLLOW RECOMMENDED W ARNINGS, CAUTIONS, AND SAFETY PROCEDURES, AND MANUF ACTURER’S GUIDELINES FOR YOUR VEHICLE BA TTERY . IMPORT ANT This unit is delivered in a partially charged state - you must fully charge it before using it for the first time.
8 2.3 JUMP-ST ART PROCEDURE FIGURE 2 1. T urn Of f ignition and all accessories (radio, a/c, lights, cellphone, etc). If vehicle, place transmission in “park” and set the emergency brake. 2. Make sure the unit’ s Power Safety Switch is turned OFF .
9 3. USE AS A 12-VOL T DC POR T ABLE POWER SUPPL Y W ARNING: NEVER INSER T A CIGARETTE LIGHTER INTO ACCESSORY SOCKET NOTE: Make sure that the Unit’ s Power Safety Switch is AL W A YS in the Of f position when using the unit’ s 12 volt DC cigarette-lighter type accessor y outlet.
10 4.2 DC RECHARGE Recharging the Main Unit from an external DC power source requires the use of the DC/DC Recharge Cable. This cable has a DC connector at each end. See Figure 3B. MAKE SURE SAFETY ON/OFF SWITCH AND WORKLIGHT ARE TURNED OFF DURING RECHARGE, THIS MA Y SLOW RECHARGE OF THE MAIN BA TTERY .
11 6. BA TTER Y DISPOSAL Contains a maintenance-free, sealed, non-spillable, lead acid batter y , which must be disposed of properly . Recycling is required -contact your local authority for information. Failure to comply with local, state and federal regulations can result in fines, or imprisonment.
12 © 2003 VECTOR MANUF ACTURING, Ltd. • FT . LAUDERDALE, FL 33312 MADE IN CHINA If the unit is repaired, new or reconditioned replacement parts may be used, at V ector Manufacturing’ s option. A unit may be replaced with a new or reconditioned unit of the same or comparable design.
An important point after buying a device Vector VEC016 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector VEC016 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector VEC016 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector VEC016 you will learn all the available features of the product, as well as information on its operation. The information that you get Vector VEC016 will certainly help you make a decision on the purchase.
If you already are a holder of Vector VEC016, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector VEC016.
However, one of the most important roles played by the user manual is to help in solving problems with Vector VEC016. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector VEC016 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
