Instruction/ maintenance manual of the product SLH100P Vector
Go to page of 12
SLH100P IMPORT ANT SAFETY INFORMA TION, SA VE THESE INSTRUCTIONS TO REDUCE THE RISK OF INJURY , USER MUST READ AND UNDERST AND THIS INSTRUCTION MANUAL. THIS MANUAL CONT AINS IMPOR T ANT INFORMA TION REGARDING THE OPERA TION AND W ARRANTY OF THIS PRODUCT .
GENERAL SAFETY W ARNINGS AND INSTRUCTIONS FOR ALL APPLIANCES READ ALL INSTRUCTIONS W ARNING: Read and understand all instructions before operating product. Failure to follow all instructions listed below may result in electric shock, fire and/or serious injur y .
• OUTDOOR USE EXTENSION CORDS. When tool is used outdoors, use only extension cords intended for use outdoors and so marked.Safety guidelines / definitions SAFETY GUIDELINES/DEFINITIONS DANGER: Indicates an imminently hazardous situation which, if not avoided, will result in death or serious injur y .
• Do not look directly at lighted lamp. • Never shine the spotlight into another person’ s eyes. • Keep sharp objects away from lens – it is glass and can break. W ARNING: RISK OF FIRE OR INJURY TO PERSONS FROM CONT ACT WITH HOT LENS: Never block the lens of this light.
T ABLE OF CONTENTS Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Unpacking your SLH100P HID Light . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 Features . . .
Controls and Functions CHARGING THE BA TTER Y The unit is delivered in a partially charged state. It must be fully charged prior to first use by using the 120 volt AC method. After charging, disconnect the Adapter from the external power source, then disconnect the Adapter from the AC Recharge Port.
6 OPERA TING INSTRUCTIONS Using the Spotlight The HID Spotlight is operated by the switch located on the handle of the unit. Using the Adjustable W ork Stand Set the hands-free adjustable work stand to the desired position; the stand will click into position.
7 3. Disconnect the terminals and replace the batter y with the same type and size listed in the Specifications section in the back of this manual. 4. Replace the batter y compar tment cover and screws. 5. T urn the spotlight’ s ON/OFF switch to the ON position to ensure proper operation of spotlight.
8 SPECIFICA TIONS Spotlight: 6000 K 35 W Mh Batteries: 12V 7Ah SLA AC Adapter: 13.5V 750 mA DC Adapter: 12 V SLH100P_ManualEN_091406 9/28/06 10:55 AM Page 8.
9 SLH100P_ManualEN_091406 9/28/06 10:55 AM Page 9.
10 SLH100P_ManualEN_091406 9/28/06 10:55 AM Page 10.
11 ONE YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Products, Inc., regarding this product. There is no other warranty , other than those described herein.
An important point after buying a device Vector SLH100P (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector SLH100P yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector SLH100P - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector SLH100P you will learn all the available features of the product, as well as information on its operation. The information that you get Vector SLH100P will certainly help you make a decision on the purchase.
If you already are a holder of Vector SLH100P, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector SLH100P.
However, one of the most important roles played by the user manual is to help in solving problems with Vector SLH100P. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector SLH100P along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
