Instruction/ maintenance manual of the product DK080706 Vector
Go to page of 20
1 OWNER’S MANUAL & W ARRANTY INFORMA TION THI S MA NUA L CON T AIN S IM POR T A NT IN FOR MA TI ON R EGA RDI NG SA FET Y , OPER A TIO N, MAINTENANCE AND STORAGE OF THIS PRODUCT . BEFORE USE, READ AND UND ERS T AND ALL CA UTI ONS , W AR NIN GS, INST RUC TIO NS AN D PRO DUC T LAB ELS, PLU S YOUR VEHICLE’S BA TTERY MANUF ACTURER GUIDELINES.
2 IMPOR T ANT SAFETY INSTRUCTIONS Read and Understand all W arnings, Cautions and Notes before operating Power City . W arnings alert the user to hazardous conditions that can be harmful to people. Cautions aler t the user to conditions that can cause property damage.
3 CONTENTS 1. INTRODUCTION ...................................................... 4 1.1 General discription .............................................................................. 4 1.2 Key features .............................................
4 1. INTRODUCTION Congratulations on selecting the V ector Power City® Multi-Function AC/DC Power Sys- tem. Power City is an advanced power and jump-star t system with unique features that set it far above the value and utility of ordinar y jump-star ters.
5 FIGURE 2 1.2 KEY FEA TURES • On/of f safety power switch (no key required, no key to get lost!) • Cordless/rechargeable-includes recharge adapters for standard 120 volt AC wall socket and vehicl.
6 1. TIRE V AL VE CONNECTOR 2. COMPRESSOR HOSE 3. AC/DC CHARGER 4. INVERTER POWER CORD, LANTERN EXTENSION CORD 5. CABLE & NOZZLES STORAGE COMP ARTMENT 6. DC RECHARGE POWER CORD 7. CABLE STORAGE CHANNEL 8. NEGA TIVE JUMPER CABLE 9. POSITIVE JUMPER CABLE 10.
7 3. USE AS A 12 VOL T DC PORT ABLE POWER SUPPL Y W ARNING: NEVER INSERT A CIGARETTE LIGHTER IN POWER CITY’S ACCESSORY SOCK- ET . 1. Lift up the cover of one of the12 volt DC accessor y sockets. 2. Insert the 12 volt DC plug from the appliance into the accessor y socket.
8 4.2 PRINCIPLES OF OPERA TION The power inverter conver ts power in two stages. The first stage is a DC-to-DC conversion process that raises the low voltage DC at the inver ter input to 145 volts DC. The second stage is the actual inverter stage that converts the high voltage DC into 120 volts, 60 Hz AC, Modi- fied Sine W ave (MSW).
9 FIGURE 6 FIGURE 7 4.3.1 PROCEDURE FOR CONNECTING INVERTER TO REMOTE DC SOURCE Open the cable hatch and remove the Inver ter power cable (the one with the lantern extension cord) press the inverter cover tab and remove the cover . Ensure that the inverter’ s power switch is off.
10 DO NOT CONNECT TO AC DISTRIBUTION WIRING: the inver ter is engineered to be connected directly to sta ndard electrical and electronic equipme nt in th e manner described above. Do not direct wire the power inverter to household or RV AC distribution wiring.
11 4.7 INVERTER FUSE REPLACEMENT The following assumes that the main unit batter y has a charge and that there is no output from the 120 V AC receptacle. If you find that a fuse is blown (open) determine the cause of the shor t before restarting the power inverter again.
12 5.3 TIRE INFLA TION OR PRODUCTS WITH A V AL VE STEM 1. Place connector (chuck) on valve stem. 2. Push connector toward valve stem and close thumb latch. 3. Make sure connector is pushed on to valve stem as far as possible before closing thumb latch.
13 6.2 LANTERN OPERA TION DET A TCHED FROM MAIN UNIT The lanter n may be removed for use away from the main unit by first sliding the top latch back and then lifting the Lantern.
14 LANTERN LENS LENS RET AINING SCREW FLUORES- CENT LAMP SPRING CLIP BOTTOM LENS T AB 6.3 LAMP REPLACEMENT The only lamp is in the lantern assembly . For any maintenance of the lamp, you will need a small Phillips screwdriver and a soft clean cloth.
15 7.1 AC RECHARGE AC recharge requires the use of the supplied AC/DC adapter . The adapter must be powered from 120 volt AC, 60 Hz Nor th American standard household AC outlets. The batter y status display will automatically activate during AC recharge.
16 5. Charge the unit until the green CHARGED indicator is lit when the charge status button is pressed - DO NOT EXCEED 8 HOURS MAXIMUM. 6. After charging, disconnect the cables and store them in the cable storage hatch.
17 10. SPECIFICA TIONS: Jump Start Clamps ...................................................... 400 Amps - Heavy Duty Copper Jumper Cables ........................................................................ #4A WG W elding Cable Peak Amps ......
18 ONE YEAR LIMITED W ARRANTY PROGRAM This limited warranty program is the only one that applies to this product, and it sets forth all the responsibilities of V ector Products, Inc., regarding this product. There is no other warranty , other than those described herein.
19.
20 © 2006 VECTOR PRODUCTS, INC. FT . LAUDERDALE, FL 33312 MADE IN CHINA DK080706.
An important point after buying a device Vector DK080706 (or even before the purchase) is to read its user manual. We should do this for several simple reasons:
If you have not bought Vector DK080706 yet, this is a good time to familiarize yourself with the basic data on the product. First of all view first pages of the manual, you can find above. You should find there the most important technical data Vector DK080706 - thus you can check whether the hardware meets your expectations. When delving into next pages of the user manual, Vector DK080706 you will learn all the available features of the product, as well as information on its operation. The information that you get Vector DK080706 will certainly help you make a decision on the purchase.
If you already are a holder of Vector DK080706, but have not read the manual yet, you should do it for the reasons described above. You will learn then if you properly used the available features, and whether you have not made any mistakes, which can shorten the lifetime Vector DK080706.
However, one of the most important roles played by the user manual is to help in solving problems with Vector DK080706. Almost always you will find there Troubleshooting, which are the most frequently occurring failures and malfunctions of the device Vector DK080706 along with tips on how to solve them. Even if you fail to solve the problem, the manual will show you a further procedure – contact to the customer service center or the nearest service center
